Perturbation Solution to 3-D Nonlinear Cavity Flow Problems
A 3-D nonlinear problem of fully cavitating flow past an axisymmetric body at a small angle of attack is investigated by the perturbation method. The first three order perturbation equations...

Computation of Wind Flow Around a Building
A numerical investigation of wind flow around a three-dimensional building is presented by solving weakly compressible flow equations, together with Smogrinsky's subgrid-scale...

A Compact Nonlinear Solution Method for Two Phase Stefan Problems
Finite element formulations for fluid filling problems with solidification are derived using previously developed unified transformation techniques. The nonlinear formulation for two phase...

Numerical Simulation of Dam-Breaking Waves
Recently, as a high-resolution numerical technique, the Total Variation Diminishing (TVD) method is applied to Aerodynamic shock problems successfully. In this paper, a Total Variation...

Parametric Excitation of Collapsible Latex Tubes
In 1985, Liu and Ding (1989) made an experiment of collapsible tubes containing a pulsatile flow. A latex tube is sealed up in a plexiglass chamber. If the transmural pressure (TP) of...

Numerical Modeling of Pollutant Transport in Estuaries
A robust numerical solution to the pollutant transport phenomenon in an estuary is presented. The fractional step algorithm is employed to split the physical process into convection step...

Assessment of Left Ventricular Flow Dynamics Using the Finite Analytic Method: Potential for Clinical Applications
Left ventricular (LV) function is traditionally assessed from chamber wall motion, rheological properties of the myocardium, and invasive measurements of chamber pressure. In order to...

Effect of Stenotic Geometry on Blood Flow Behavior
The dynamic characteristics of the blood flow is affected by the area reduction of stenosis. To estimate the severity of stenosis, the information about the geometry should also be accounted....

Simulation of Blood-Heart Interaction: Validation of Approach
An existing pressure correction method to model unsteady flow with arbitrarily moving boundaries has been adapted to simulate the interaction of three-dimensional blood flow with a mitral...

Three-Dimensional Blood Flows Associated with Intra-Aortic Balloon Counterpulsation
Three-dimensional blood flow processes associated with intra-aortic balloon counterpuslation (IABP) are calculated using a Cray YMP supercomputer. The mathematical model incorporates a...

A Computer Simulation of the Blood Flow at the Aortic Bifurcation with Flexible Walls
To understand the possible role of hemodynamics in the atherogenesis, especially the effect of the flexibility of the arteries, a two-dimensional numerical model for the blood flow at...

Finite Analytic Explicit Scheme for Viscous Burgers' Equation
Burgers' equation is numerically analyzed by finite analytic method. The basic idea of finite analytic method is to incorporate the analytic solution of partial differential...

Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...

A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...

Spatial Coherence in the Chaotic Dynamics of Multi-Degree-of-Freedom Elastic Impact Oscillators
In this paper, we describe a method for estimating the number of degrees of freedom needed to adequately model nonlinear structural systems. We apply the method to the study of chaotic...

Buckling of Lamianted Plates Using h-p Finite Strips
The paper presents a computationally efficient alternative to the finite element method for the initial buckling analysis of long, shear-deformable composite laminates. In addition the...

A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....

A Damping Model for the Vibration of Nonlinear Laminated Composite Cylindrical Panels with High Order Transverse Shears
The damping characteristics of nonlinear vibration of a cylindrical panel including large displacements/rotations and parabolic transverse shears has been discussed in this study. The...

Partial Hybrid Stress Element for Higher-Order Laminated Plates Theory
The partial hybrid stress method is applied to higher-order plate theory for orthotropic laminated plates. This new element performs better than displacement formulation and approaches...

Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....

 

 

 

 

Return to search