RCC Dam Design Concepts Versus Construction Conditions for Stagecoach Dam
The Stagecoach RCC dam was constructed using current state-of-the-art knowledge and the geotechnical approach to roller compacted concrete (RCC) mix design. The design was prepared in...
Concrete-Faced RCC Dams
In the past 10 years, roller compacted concrete (RCC) has gained wide acceptance as a cost effective material for constructing and rehabilitating dams. Since the first RCC dams had seepage...
Roller Compacted Concrete Mix Design
This paper presents a concise and proven mix design process. It covers all the steps necessary to produce a good roller compacted concrete (RCC) mix design for mass and structural applications,...
RCC Test Specimen Preparation?Developments Toward a Standard Method
As there is no widely recognized standard for the preparation of laboratory test specimens for roller compacted concrete (RCC) mixtures, criteria for developing such a standard are listed....
RCC Mixes and Properties Using Poor Quality Materials?Concepcion Dam
This paper discusses aggregate studies, mix investigations, and material property tests for the relatively poor quality materials available for use in RCC at Concepcion Dam....
Design of Pena Colorada Tailings Retention Dam
This paper discusses the details involved in the design of a 66 meter high RCC dam to be used to create storage for slurry from an iron ore mining operation located near Manzanillo, Mexico....
Thermal-Structural Analysis Methods for RCC Dams
Current procedures for evaluating temperature control and the placement of contraction joints in roller compacted concrete dams are not always evaluated with the aid of detailed analysis...
Design of the Boney Falls RCC Emergency Spillway
The Boney Falls Emergency Spillway was designed as a mass roller compacted concrete structure. Alternative designs considered include a fuse plug, lowering the embankment and paving with...
Rehabilitating Small Earth Embankments with RCC
The rehabilitation of existing earth dams using roller compacted concrete (RCC) is gaining wider acceptance in the engineering and construction community. Presented herein is a discussion...
Roller Compacted Concrete III
This proceedings,
Dams Going Safely over the Top
Many older dams can't pass updated design floods without overtopping the embankment crest. Conventional upgrade methods, enlarging spillways or raising crests, are expensive....
Laupahoehoe Harbor Planning, Design, & Construction
Laupahoehoe Harbor provides access to the fertile fishing grounds along the northeast or Hamakua coast of the island of Hawaii, Hawaii. The planning, design, and construction of Laupahoehoe...
A Design Manual for Coastal Fluidization Systems
This paper summarizes a recently completed design manual on fluidization systems to manage sand in the coastal environment for sand bypassing at inlets and harbor mouths and for creating...
Cost Effective Risk Allocation for Coastal Engineering Projects
Project participants will benefit significantly by routinely taking a more systematic, structured, and global view of risk than is sometimes done at present. Enhanced and broadened cognizance...
Tackling Trapped Sediments
Crater-sink fluidization has been used to recover sediment from harbors for the past couple of decades. Can this method bypass sediment around dams and return it to eroded beaches, solving...
Passive Acoustic Emission for Quantitative Evaluation of Freeze Thaw and Alkali Aggregate Reaction in Concretes
Several experiments are reported in which the progression of freeze thaw (FT), alkali-aggregate reaction (AAR), and internal cracking caused by mechanical loading were monitored using...
Damage Assessment in Concrete Using Acoustic Emission
An acoustic emission (AE) is a localized rapid release of strain energy in a stressed material. This energy release causes stress waves to propagate through the specimen. These acoustic...
Concrete Beam Testing with Optical Fiber Sensors
The use of an embedded multimode optical fiber to monitor curing and load-to-failure testing of a reinforced concrete beam has been investigated. The embedding process used to network...
A Critique of the Ultrasonic Pulse Velocity Method for Testing Concrete
The pulse velocity method is the most widely used ultrasonic nondestructive method for assessing concrete quality. However, it has been well established that the relation between ultrasonic...
Frequency Spectrum Analysis of Ultrasonic Testing Signal in Concrete
Description is given on high-speed sample apparatus connected with the CTS-25 low frequency ultrasonoscope and computer, the time domain of ultrasonic testing signal is transformed to...
Return to search