Buffeting Response of Bridges
The present study provides a theoretical analysis of the behavior of the response of long-span bridges to turbulent wind loads in the region of stable motion. The analysis is based on...
Fully Nonlienar Models to Simulate Structural Response to Wind Loading
The paper summarizes some results of the analyses of two tall broadcasting towers, obtained by means of a specially developed numerical procedure taking into account all relevant nonlinear...
Wind Loads on Large Broadcasting Antennas: Records and Elaborations
Alternative estimations of the 50-year gust winds from the data available in typical Italian sites of broadcasting antennas are summarized and compared with the design winds suggested...
Safety Analysis of Steel Building Frames Under Dynamic Wind Loading
A method is presented for evaluating the lifetime risk of failure, in terms of probability of excessive inter-floor deflection, for a class of steel building frames subjected to dynamic...
Nonlinear Dynamic Response of Marine Structures Under Random Wave Loads
A simple nonlinear dynamic structure/ship model is combined with a filtered noise model of random wave loads. It is shown how this model can include (1) non-Gaussian wave elevations and...
A Methodology for Assessing the Reliability of TLP Tethers Under Maximum and Minimum Lifetime Loads
The Tension Leg Platform (TLP) is a large, floating offshore platform for producing oil and gas in deep water. The TLP is moored to the ocean floor by vertical tethers. Loads in the tethers...
Loading Uncertainties in Extreme Waves
Uncertainties associated with extreme base shear forces and extreme overturning moments are estimated for an idealized eight-legged jacket platform. The structure is assumed to respond...
Bayesian Updating of Axial Capacity of Single Pile
The paper outlines a Bayesian technique to update predictions of pile driving and axial pile capacity on the basis of pile driving records. The approach enables one to systematically account...
Probabilistic Evaluation of the Performance of Axially Loaded Bored Piles
Probabilistic evaluation of single slender elastic elements, bored piles, in a multi-layered soil system without noticeable displacement of the soils are considered. The numerical analyses...
Development of Seismic Hazards Data Base
A seismic hazards data base has been developed as a research tool for the engineering and seismology communities. The data base, which is still growing, currently contains information...
Graphic Demonstration of Seismic Hazards Data Base
A seismic hazards data base has been developed as a research tool for the engineering and seismology communities. The data base presently holds five categories of data, the largest of...
Response Modification Factors for Buildings and Bridges
Response Modification Factors (RMF) are often used for the seismic design and the safety evaluation of buildings and bridges. The advantage of using RMF is to account for the nonlinear...
Wind Vs. Seismic Design
This paper is concerned with the reliability analysis of building structures subjected to multiple natural hazards (seismic and wind in this case) within the framework of contemporary...
Multi-Hazard Risk Assessment of an Offshore Structure
This paper develops and illustrates a methodology for multi-hazard modal risk assessment. The case study involves assessing risk to an offshore structure in a load environment consisting...
Iterative Subsystem Analysis for Seismic Monte Carlo Studies
Three iterative subsystem analysis techniques for Monte Carlo simulation of response time histories are examined. The three subsystems are designated primary, secondary, and interface,...
Identification of Seismic Waves for a Nonstationary Load Model from Strong Motion Records
Strong motion records of 5 moderate to strong earthquakes with different source mechanisms are investigated by Evolutionary Spectra Analysis. Only earthquakes with strong motion stations...
The Application of Reliability Based Design for Earthquake Resistant Communications Structures
Current earthquake design criteria consists of applying equivalent lateral static forces embodied in design codes. The structures designed in conformance with such provisions and principles...
Safety Improvement of Earthquake Loaded Structures Application of Semi-Active Control in Multi-Storey Buildings
This paper presents the studies for development of a new concept of aseismic design of structures. Basis of that engineering will be a structural optimization including elastic supported...
A Continuous Damage Index for Seismic Reliability Assessment of Structural Steel Elements
Based on experimental investigations using steel plate elements subjected to cyclic axial loading, a continuous damage and/or deteriorating process is examined. In order to describe intermediate...
Damage Evolution in Reinforced Concrete Members Under Cyclic Loading
The paper presents a new damage indicator D, valid for reinforced concrete sections under cyclic loading. DQ, based on sectionally absorbed energies,...
Return to search