Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...

An Analysis of an Inflatable Module for Planetary Surfaces
Design and construction of a structure on planetary surfaces requires addressing a host of issues not encountered on Earth. A modular quilted inflatable structure consisting of thin membranes...

Prototype Lunar Base Construction Using Indigenous Materials
A lunar base must be designed to withstand harsh lunar conditions, which include severe internal pressure loads and a high radiation level. Yet to provide for economical and rapid future...

Cylindrical Fabric-Confined Soil Structures
Using the local soil as a structural material can greatly reduce the transport requirements for constructing Lunar and Martian surface structures. A fabric-soil structural concept which...

Experimental, Physical and Numerical Modeling of Lunar Regolith and Lunar Regolith Structures
An extensive series of laboratory strength and deformation experiments have been performed on a lunar regloith simulant. Results of these experiments are compared to results from experiments...

The Challenge of Constraining Mass for Planetary Construction
This paper discusses the issue of minimizing the mass required to be delivered from earth for planetary construction. New machinery, methods and concepts are discussed....

Constructing Radiation Shields with Textiles for Lunar Applications
The problem of radiation shielding on the lunar surface is significant. The mass required for adequate shielding is enormous and economics would dictate the use of lunar soil for this...

Building Lunar Roads?An Overview
Outposts and permanent installations on the moon will need a network of surface roads connecting them. The problem of creating such roads is more challenging than on Earth in most ways,...

Construction of a Far-Term (2020+AD) Lunar Base
Several case studies have been performed which provide interesting insights into the design and operation of a lunar base. Yet few of these studies have addressed the specific steps which...

Mass and Energy Tradeoffs of Axial Penetration Devices on Lunar Soil Simulant
Axial penetration of the lunar surface was performed to collect soil samples with drive tubes and drill cores on the six successful Apollo missions. Although the pile-driving and drill...

Indigenous Planetary Construction Material Through Soil Modification
This paper will discuss the theory of soil modification and its potentials for producing planetary construction materials. The authors will also present the results of prelimnary experriments...

Mechanical Properties of Lunar Soil and Simulants
Investigation of the physical and mechanical properties of lunar soil carried out by the USSR and the USA; both in situ and on returned samples, has resulted in considerable information...

Structural Materials from Lunar Simulants Through Thermal Liquefaction
Thermal liquefaction that allows development of intermediate ceramic composites from a lunar simulant with various admixtures is used to develop structural materials for construction on...

In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...

Isotopic Separation of ?He/4He From Solar Wind Gases Evolved from the Lunar Regolith
The potential benefits of 3He when utilized in a nuclear fusion reactor to provide clean, safe electricity in the 21st century for the world's inhabitants...

Sulfur as a Lunar Resource
Sulfur on the Moon may prove to be a satisfactory replacement in some uses for lighter volatile elements and their compounds. Although sulfur is not richly concentrated on the Moon, it...

Chemical Analysis in Space Exploration: A Lunar-based Chemical Analysis Laboratory (LBCAL)
Many questions need to be answered before humans can be supported for extended periods in space - an environment inimical to terrestrial life. While some questions of a physiological nature...

Recent Developments of the Carbotek Process for Production of Lunar Oxygen
Carbotek and Shimizu Corporation are conducting joint development work on the further development of the Carbotek Process to produce oxygen from lunar ilemnite by hydrogen reduction. The...

Hydrogen Reduction of Lunar Soil and Simulants
Carbotek, Inc., and the Energy and Environmental Research Center (EERC) are cooperating on further development of the Carbotek process to produce oxygen from lunar ilmenite by hydrogen...

Lunar Oxygen ? The Reduction of Glass by Hydrogen
The direct reduction of volcanic glass by hydrogen has been proposed as a method of extracting oxygen from the lunar soil. Experiments using lunar simulant glasses reacted with flowing...

 

 

 

 

Return to search