Mechanical Properties of Compacted Lunar Simulant Using New Vacuum Triaxial Equipment
Mechanical stress-strain-strength properties of Arizona Lunar Simulant (ALS) are investigated by using a newly developed vacuum triaxial device that allows compaction under different initial...
Composite Materials for Structures on Planetary Surfaces
Development of structures for planetary surface environments depends upon the use of the most appropriate materials. Advanced composite materials are apparently the best candidates for...
Comparison of Micromechanical Models for Elastic Properties
The effective elastic properties for unidirectional composites, as predicted by several analytical micromechanical models are compared for glass/epoxy and graphite/epoxy. A brief review...
Regolith Dynamics
Due to the differences of the gravitational accelerations of the Earth and Lunar environments, geotechnical engineering must be applied differently in the two environments. This study...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Principles of Control for Robotic Excavation
Excavation can be considered one of the most unstructured problems in the construction environment. On one hand, many technologies have been developed in the past to build shelters using...
The Lunar Transit Telescope (LTT): An Early Lunar-Based Science and Engineering Mission
The moon is an excellent spacecraft, with mass, rotational, thermal and orbital properties which make its utilization as a base for astronomical observations superbly reasonable. The Lunar...
Evacuation Modeling Near a Chemical Stockpile Site
Dynamic evacuation modeling was used as an aid in emergency response planning by Tooele County, Utah, location of the United States' largest stockpile of unitary chemical weapons, The...
Coastal Engineering Practice
This proceedings contains 70 papers presented at the American Society of Civil Engineers Specialty Conference Coastal Engineering Practice '92 held at Long Beach, California,...
Evaluating Spillway Adequacy
More than a third of all dam failures are caused by overtopping. Equipment malfunctions or operations errors are sometimes to blame, but the principal cause is inadequate spillway capacity....
Urban Development on Alluvial Fans
An increasing number of developments has been planned in areas subject to flood hazards. To protect developments from flood damage and to prevent accumulated negative effects on floodplains,...
Risk Analysis in Water Resources Engineering: Development and Application
Traditional engineering approaches for evaluating safety and performance in technical projects are usually based on conceptual modeling and the application of engineering standards. Risk...
Variability Response Functions and Stochastic Field Discretization in Stochastic Finite Element Methods
Stochastic systems whose mechanical properties vary spatially are investigated in the present paper. The stochastic response variability of the systems is characterized by means of the...
Dynamic Response of Uncertain Two-Dimensional Structures
A concept for the reliability analysis of structures with uncertain elastic and mass properties is presented. Its applicability is shown by means of a numerical example. The results are...
Evaluation of Expansive Clay Soils in Tucson, Arizona
Research was conducted to investigate the mineralogy, engineering properties, and regional distribution of expansive clay soils in Tucson, Arizona. Data derived from X-ray diffraction...
Geotechnical Database Manipulation to Effect Stochastic Analysis
Existing or easily-developed databases of regional geotechnical information can be used to estimate prior probability distributions and parameters for use in stochastic analyses. Prior...
Inspection Planning for Surface Fatigue Cracks
A reliability based method for planning of inspections to detect surface fatigue cracks is presented. Cracks are described as semi-elliptical surface cracks. The conditions governing fatigue...
Some Remarks on BK-Models for Fatigue Crack Growth
The choice of a model parameter for concentrating the entire uncertainties of a constant load amplitude fatigue crack growth process is shown to be sufficient when reproducing the first...
Reliability of Controlled Structures Subject to Real Parameter Uncertainties
This paper presents a systematic and probabilistically consistent approach for determining the likelihood that instability will result from the uncertainty inherently present in a controlled...
Effect of Active Control to Structural Reliability
Most available results in the study of structural reliability deal with idealized mathematical representation of structures. With model supported diagnosis of the structural condition...
Return to search