Microtunneling MARTA
Microtunneling technology was used to provide temporary support for two transit tunnels that were part of the extension of the Metropolitan Atlanta Rapid Transit Authority system. This...
Wind-Induced Response of Torsionally Coupled Buildings
This paper summarizes the results of a comprehensive three-dimensional dynamic analysis of tall buildings subjected to fluctuating wind forces. Random vibration theory is used to relate...
Optimal Distribution of Tuned Mass Dampers in Wind-Sensitive Structures
Modern high-rise buildings are susceptible to excessive accelerations at the upper floors in wind storms due to flexibility and low damping. In order to keep acceleration levels below...
Reliability of Overhead Transmission Lines Subjected to Wind Action
The probability distribution of the strength of steel towers used in transmission lines, due to wind excitation, is evaluated on the basis of test results of 72 towers of various designs,...
Safety Analysis of Steel Building Frames Under Dynamic Wind Loading
A method is presented for evaluating the lifetime risk of failure, in terms of probability of excessive inter-floor deflection, for a class of steel building frames subjected to dynamic...
A Methodology for Assessing the Reliability of TLP Tethers Under Maximum and Minimum Lifetime Loads
The Tension Leg Platform (TLP) is a large, floating offshore platform for producing oil and gas in deep water. The TLP is moored to the ocean floor by vertical tethers. Loads in the tethers...
Automated Damage-Controlled Design of RC Buildings
This paper presents an automated damage-controlled design method, which aims for uniform damage distribution throughout the entire building frame while respecting the strong-column weak-beam...
Pipeline Field Experiment at Parkfield, CA
A field experiment designed to investigate the performance of buried pipelines at a fault crossing has been constructed near Parkfield, CA. The site was chosen to capitalize on the predicted...
Response Analysis of Crude Oil Transmission Systems
A preliminary analysis of the seismic response of continuous steel pipelines is presented. The Crude Oil Transmission System in the New Madrid Mo. area is choosen as an example. Assumptions...
A Continuous Damage Index for Seismic Reliability Assessment of Structural Steel Elements
Based on experimental investigations using steel plate elements subjected to cyclic axial loading, a continuous damage and/or deteriorating process is examined. In order to describe intermediate...
Load Path Dependence of Structural Systems
This paper presents the results of an investigation into the sensitivity of the behavior of framed structures to load path. Simple but realistic structural steel frames have been designed...
A New Formulation for Structural Reliability of Parallel Systems
Presented is a realistic method to calculate the reliability of a parallel structural system. The present theory considers that each element of a parallel system may have different reliability...
Durability and Damage Tolerance Evaluations of Jet Transport Structures
Many design considerations are involved in ensuring structural integrity of Boeing jet transports, which have common design features validated by extensive analyses, tests, and service...
Safety Evaluation of a Tall Building
This paper uses the extended Kalman filter to perform the system identification of a tall building with the aid of recorded accelerograms obtained from strong-motion seismographs. The...
Model Identification of an Arch Bridge for Dynamic Analysis
The dynamic responses of a steel deck tension-tied arch bridge subjected to earthquake excitations were investigated. The 189 m (620 ft) Birmingham Bridge located in Pittsburgh, PA was...
Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...
Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...
Fatigue Reliability of Steel Structures in the Presence of Residual Stresses
An extended model for the assessment of fatigue reliability of steel structures in the presence of residual stresses is developed. The model explicitly includes the uncertainties of the...
Fatigue Reliability and Remaining Fatigue Life of Existing Steel Rail-Road Bridges
This paper presents a fatigue reliability model for the reliability-based evaluation of remaining fatigue life of existing rail-road bridges. It is demonstrated that the simple fatigue...
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
Return to search