Comparison of Wave Overtopping Prediction to Measurements from Large-Scale Model Tests
A recent large-scale physical model study was sponsored by Arco Alaska, Inc. , to evaluate slope designs for an Arctic offshore oil drilling island. The drilling island will be located...
Wave Runup Around Conical Structures
A variety of conical structures have been proposed for use in the Arctic environment, primarily because the inclined surface of such a structure gives rise to reduced ice loads associated...
Design and Model Testing of an Arctic Seawater Intake for Sedimentation and Wave Effects
A seawater intake structure is being designed to provide flood water for tertiary recovery of oil from the Kuparuk oil field near Prudhoe Bay, Alaska. A wave effects study establishes...
The Sand Mattress Method of Slope Protection
The sand mattress concept offers promise as an economical alternative to sand bag armor for two distinct applications: (1) slope protection for exploratory islands and/or causeway facilities,...
Asphalt Revetments for Slope Protection in the Arctic
Experience in the Netherlands demonstrates that slope protection of coastal embankments subjected to heavy wave action can be accomplished with lining systems made of mixtures of asphalt...
Strength-Deformation Properties of Arctic Silt
Hydrocarbon exploration and production activities in the Beaufort Sea require construction of gravity structures capable of withstanding extremely large ice loads at sites where the subsea...
Cyclic Multiaxial Cubical Cell Experiments on a Norton Sound Silt
A servo-controlled multiaxial cubical test apparatus has recently been used to investigate the behavior of the foundation soil for a gravity structure in Norton Sound of the Alaska Outer...
Foundation Response of Arctic Structures to Time-Dependent Ice Loadings
Arctic structures are subjected to a variety of time-dependent loadings, the most important of which are those due to ice. An approach is presented for estimating the strength and deformation...
Use of Rayleigh Waves in Liquefaction Studies
The Spectral-Analysis-of-Surface-Waves method is a new seismic method for efficient determination of shear wave velocity in situ. Vertical impacts applied to the ground surface are used...
Computer-Aided Studies of Complex Soil Moduli
Low-cost microcomputers and new electronic components make it possible to measure accurately the phase and amplitude of mechanical waves in the frequency domain at a small fraction of...
Seismic CPT to Measure In-Situ Shear Wave Velocity
A new test, called the seismic cone penetration test (SCPT) is described. A small rugged velocity seismometer has been incorporated into an electronic cone penetrometer. The combination...
Relationships between Shear Wave Velocity and Depth of Overburden
Relationships between in-situ shear wave velocity and depth of overburden have been derived for various Quaternary age soils encountered primarily in Southern California. The geotechnical...
Case Histories: Evaluation of Drilled Pier Integrity by the Stress Wave Propagation Method
The Stress Wave Propagation Method (SWPM) was used to nondestructively investigate the integrity of straight-shaft drilled pier foundations at two sites in the Denver, Colorado area. Drilled...
Use of Asphalt in Treatment of Dam Foundation Leakage, Stewartsville Dam
This paper presents the recent development and application of a hot asphalt grouting technique used to stop a 5,000 Imperial Gallons Per Minute (IGPM) (22,000 lpm) dam leakage under full...
Simulation of Rock Fracture with the 3-D SHALE Code
The 3-D SHALE code simulates the propagation of stress waves and the occurrence of fracture in brittle solids. The physical models and numerical methods in this code are similar to those...
Noise and Air Blast from Construction Blasting
Noise generated by construction blasting differs from other construction noise because of its frequency content. The audible high frequency portion is accompanied by a non audible, lower...
New Ways with Concrete
When NASA builds on the moon and in space, the structures will be concrete, say researchers at the Portland Cement Association's Construction Technology Laboratories. They...
Reliability of Urban Water Supply Reservoir System
Assessment of the reliability, or risk of failure, of water supply reservoirs is dependent on several factors including reservoir volume, probability of dam failure and drought inflows....
Detection of Leakage Through Subsurface Barriers Using Guided Acoustic Waves
The primary method for preventing hazardous liquid and leachates from entering the groundwater is the use of a physical barrier. These barriers are susceptible to a number of mechanisms...
Roller Compacted Concrete
Roller compacted concrete has emerged recently as an economical material and rapid method of construction for use in gravity dams, overflow structures and heavy duty pavements. The economics...
Return to search