Onsite Storage Facility for Low Level Radwaste
The Tennessee Valley Authority (TVA) has designed and constructed an onsite storage facility for low level radwaste (LLRW) at its Browns Ferry Nuclear Plant in northern Alabama. The paper...
Safety Investigations of Existing Spent Fuel Storage Structures for Increased Spent Fuel Storage Capacity
Delays in the solution of disposal problems continue to create the need for additional on-site spent fuel storage capacity at commercial nuclear power generating facilities. Rod consolidation...
As-Built Locations Through Precision Photography
This paper describes a new application of close range photogrammetry as a technique for obtaining reliable as-built locations of embedded threaded inserts in concrete structures and the...
Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...
In-Plane Composite Drains
Drainage of water from outside basement walls, behind retaining walls, or highway cut or fill slopes, has long been a problem. A common solution is the aggregate drain. Often, installation...
Role of a Standard in the Production of Drilled Shafts
The preparation of drawings and documents that describe the details of the installation of drilled shafts for a project requires an up-to-date standard. The role of the standard in the...
Geotechnical Perspective?Proposed Drilled Shaft Standard
In the writer's understanding, a standard is an agreed upon manual of practice and as such, sets the level of performance and attainment considered adequate. A standard is...
A Structural Engineering Perspective for Drilled Shafts
This commentary is an attempt to close the gap between the Building Code Requirements for Reinforced Concrete (ACE 318-83) and the design of drilled shafts. The context of design includes...
Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...
Fabric-Reinforced Dikes, Craney Island
Three fabric-reinforced test sections 300-, 400-, and 750-ft long were successfully constructed on very soft dredged material deposits within the Craney Island dredged material disposal...
Electronic Computation
Dramatic changes have occurred in computer-aided structural engineering during the past 25 years. Computers have evolved from large, slow processors with little available storage to fast...
Restoration
After the San Fernando earthquake of 1971, California's State Capitol Building was declared an earthquake hazard and vacated. It took the most extensive structural and architectural...
Flanged Reinforced Concrete Flexural Members
Design aids in the forms of charts and tables are available for design of reinforced concrete flexural members. Many of these design aids were developed for design of rectangular cross...
An Overview of Structural Panels and Structural Composite Products
Plywood has been the principal structural panel for construction since the late 1940s. Today, structural panels are evolving into products such as composite panels, oriented strand board,...
Remodeled 42nd St. Bus Terminal Improves both Transit and the Neighborhood
A $160 million project to expand New York City's 42nd St. Bus Terminal was completed last year. The project is expected to improve commuter transit by increasing passenger...
Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....
Fiber-Reinforced Concrete Proves Worth for Airport Pavements
Laboratory and field tests indicate that fiber-reinforced concrete has higher flexural and tensile strength, higher impact resistance, and improved resistance to spalling and joint deterioration...
State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete
This comprehensive state-of-the-art report contains a summary of the special features of finite element analysis applied to reinforced concrete, including: constitutive relationships,...
Fiber Reinforced Concrete
In the past 10 years or so, concrete reinforced with fibers one or two inches long has begun to be used, first on a demonstration and experimental basis, then in major everyday applications....
Compression Rings Support Deep Cut
The plans for building the Cuyahoga Valley Interceptor Lift Station in Cleveland, Ohio, called for 126 ft. (38.4 m) by 105 ft. (32 m) construction, some 80 ft. (24.4 m) below grade. Bracing...
Return to search