ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Findings of the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management
Secretary of Energy James D. Watkins created the Task Force on Radioactive Waste Management in April 1991. He asked the group then to recommend measures the Department might take to strengthen...

The Role of Fault Zone in Affecting Multiphase Flow at Yucca Mountain
Within Yucca Mountain, the potential High Level Nuclear-Waste Repository site, there are large scale fault zones, most notably the Ghost Dance Fault. The effect of such high-permeability,...

Sensitivity and Probabilistic Analyses of Ground Water Travel Time in a Fractured and Variably-Saturated Geologic Medium
This paper presents a method for sensitivity and probabilistic analyses of performance of a hypothetical nuclear waste repository located in a layered, fractured, and variably-saturated...

Comparison of Predicted Far-Field Temperatures for Discrete and Smeared Heat Sources
A fundamental concern in the design of the potential repository at Yucca Mountain, Nevada is the response of the host rock to the emplacement of heat-generating waste. The thermal perturbation...

The Analysis of Repository-Heat-Driven Hydrothermal Flow at Yucca Mountain
To safely and permanently store high-level nuclear waste, the potential Yucca Mountain repository site must mitigate the release and transport of radionuclides for tens of thousands of...

The Results of Near-Field Thermal and Mechanical Calculations of Thermal Loading Schemes
Two waste emplacement schemes, borehole and in-drift, are under evaluation as potential repository drift geometries for the Yucca Mountain Site Characterization Project. Calculations were...

Systems Implications of Repository Thermal Loading
A study was conducted to determine if implementation of a hot, cold or intermediate repository thermal loading strategy would have specific impacts on the overall Civilian Radioactive...

Spent Fuel Assembly Source Term Sensitivity Parameters: SAND92-2113C TTC-1225
Containment of cask contents by a transport cask in a function of the cask body, one or more closure lids, and various bolting, hardware, and seals associated with the cavity closure and...

Investigation in 3-D of Stress Distribution in a Circular Tunnel and Vertical Emplacement Holes Due to Thermal and Overburden Loading in Tuff
Thermal stress and displacement analysis using two 3-D finite element models, one having a course mesh and one having a highly detailed mesh are presented. Results are compared to those...

Critical Stresses in Nuclear Waste Container Under Normal Handling Conditions
Critical stresses in the pintle, flat tophead, canister shell, the bottom plate and in the weldment of a high level nuclear waste canister are evaluated under a variety of static and dynamic...

Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...

Hydropulse Tomography for Identifying 3-D Permeability Distribution
For the purpose of identifying subsurface permeability distribution, a geotomographic method named Hydropulse Tomography (HT) was developed. As observation data, HT uses hydraulic pressure...

Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...

Single-Hole in Situ Thermal Probe for Hydrothermal Characterization at Yucca Mountain
The REKA thermal probe method, which uses a single borehole to measure in situ rock thermophysical properties and provides for efficient and low-cost site characterization, is analyzed...

Determination of Water Content in Unsaturated Flow Experiments Using TDR and Capacitance
Electromagnetic techniques have been used for many years for the determination of moisture content in materials. We are adapting two of these techniques to the estimation of moisture in...

ATW System Impact on High-Level Waste
Criteria are developed for transmutation system impact on HLW storage that are related to intrusion and long-term risk reduction. Thermal reactor, fast reactor, and accelerator-driven,...

System Impacts on MRS Operations
This paper describes the results of analyses conducted to evaluate impacts on monitored retrievable storage (MRS) operations and design resulting from possible changes in the CRWMS Reference...

Reliability Modeling of an Engineered Barrier System
The Weibull distribution is widely used in reliability literature as a distribution of time to failure, as it allows for both increasing failure rate (IFR) and decreasing failure rate...

Photothermal Deflection Spectroscopy Investigations of Uranium Electrochemistry
Photothermal deflection spectroscopy (PDS) has been successfully applied to the study of uranium oxide electrochemistry. A brief description of PDS and preliminary results that demonstrate...

Assessments of System Impacts of Spent Fuel Thermal Characteristics and Emplacement Rates
Analyses conducted to evaluate the impacts spent fuel thermal characteristics and emplacement rates might have on the thermal conditions in a candidate geologic repository at the Yucca...

 

 

 

 

Return to search