The MPSP System: A New Method of Grouting Difficult Rock Formations
In unstable rock masses the traditional stage grouting methods may prove impractical or ineffective. A recent innovation has been the Multiple Packer Sleeved Pipe (MPSP) System. Akin to...
Flow Behavior of Kinked Strip Drains
Due to the often expressed concern over the axial deformation of strip drains and the resulting impact on flow rate, this study has been undertaken. A laboratory experiment has been constructed,...
Clogging Study of Geotextile with Weathered Mudstone
This paper focuses on the combined use of fly ash and geotextiles as a solution for the typical engineering problem of weathered mudstone slopes encountered in Taiwan. In situ collapsed...
Survivability and Durability of a Nonwoven Geotextile
This paper presents the results of a field investigation and laboratory testing program to evaluate the properties of two different polypropylene, thermally-bonded nonwoven geotextiles...
Pull-Out Response of Geotextiles and Geogrids (Synthesis of Available Experimental Data)
During the past 15 years, there has been a considerable growth in the use of various materials to reinforce soils. The rapid development of geosynthetics and their increasing use in soil...
Highway Damage Due to Subsidence
In this study subsidence profiles over three longwall panels, which were mined beneath state highways in Southeastern Ohio, were obtained. Immediate and short term subsidences were recorded....
Markov Chains & Soil Constitutive Modeling
The focus of this research effort is the construction of a mathematical framework to assist in understanding the role of uncertainties in the constitutive/dynamic behavior of soils. The...
Probabilistic Fatigue Crack Growth Analysis with Reliability Updating
A randomized fatigue crack growth model based on the Paris and Erdogan crack growth equation is used to estimate the reliability of fatigue sensitive details in steel bridges. This model...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
Probabilistic Slope Stability?Case Study
The stability of a slope depends upon highly variable conditions of varying degrees of importance. Probability theory is used herein to assess the relative importance of the soil parameters...
Probabilistic Model for Stability of Slopes
Presented herein is a probabilistic model based on derived distributions to predict shear strength of soils and the safety factor of slopes considering uncertain properties of soil, namely:...
Simulation with Ordered Discrete-Stochastic Samples
In order to account for the viscoplastic deformations, leading to the failure of structures, the nonlinear dynamic responses can be obtained with convenient spatially discretization schemes....
Stochastic Fem Analysis of Nonlinear Dynamic Problems
This paper deals with the stochastic finite element analysis of nonlinear structural dynamic problems, using Monte Carlo simulation techniques. The stochasticity of those problems arises...
Dynamic Maps for Seismic Risk Reduction and Effects of Soil Conditions
In order to perform useful vulnerability and risk evaluations, it is essential to have at one's disposal an automatic procedure of elaboration which provides answers in real time as soon...
Structure of the Expert FRAMEX System on Fracture Mechanics
The FRAMEX expert system gathers, through independent modules, knowledge analysis techniques to be used by an expert for developing a fracture problem diagnosis. The system includes three...
Reliability Study of Randomly Imperfect Beam-Columns
In this study, the effect of random initial geometric imperfections was treated as a set of equivalent random initial forces. This concept enables the direct employment of existing stochastic...
Rock Armouring to Unconventional Breakwaters: The Design Implications for Rock Durability
This paper identifies the need for quantitative durability testing of rock for use on dynamically stable rock armored slopes. The derivation and use of a suite of engineering tests for...
Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...
Implementation and Performance of Berm Breakwater Design at Racine, WI
A large berm-type breakwater has been constructed at the entrance to Racine Harbor, Wisconsin, on the western shore of Lake Michigan. The breakwater is approximately 450 feet long, in...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Return to search