Field Verification Experiment of a Wave Power Extracting Caisson Breakwater
The Ministry of Transport in Japan is conducting a field verification experiment of a wave power converter with a vertical breakwater called the wave power extracting caisson breakwater....
Experimental Research and Parameters Optimization of a Prototype OWC Wave Power Device
The paper presents the experimental research and parameters optimization of a prototype oscillating water column (OWC) wave power device being built in China by Guangzhou Institute of...
Study on Pneumatic Wave Power Conversion System with the Water Valve Rectifier
We experimentally and theoretically studied the energy conversion characteristics on a new type of wave power conversion system with water valves. The hydraulic model experiment was performed...
Optimal Depth for Nearshore Wave Power Extractors of Fixed Type
An approach to find the water depth which brings the minimum cost of energy extracted with the wave power extractors of nearshore fixed type is proposed. A case study with Pendulor wave...
Theoretical Study on Capture Chamber with Lateral Entrance
A capture chamber with lateral entrance can be used in a pneumatic wave energy conversion system. In this paper, the output power coefficients of the capture chamber have been calculated...
Research and Development of Wave Pump
A new device, 'Wave Pump' is introduced here. The authors present the mechanism of the system, the analytical method for discharge rate, the hydraulic model test...
Water Power Resource Investigations in New Zealand
The New Zealand wave resource is dominated by strong uniform swell incident on its western and southern coasts. Electricorp Production has funded the deployment of a wave rider buoy off...
Wave Power Development in Taiwan
The feasibility study of wave power development in Taiwan was performed in two phases. The first phase included the calculation and assessment of the available wave energy along the coasts...
Progress of Floating Type Wave Power Generator
A floating type wave power generator was improved. It is a Backward Bent Duct Buoy (BBDB) which has an air chamber duct which is bent backwards. It is capable of increasing the peak conversion...
Planning a Full Scale Wave Power Conversion Test 1988-1989
The paper describes the design of the wave power converter and the principal of working. The results from a tank test on a scale model are presented with the main emphasis on design loads...
Double-OWC Wave Power Extractor of a Taut Moored Floating Structure
A double oscillating water column is proposed as a means to improve the efficiency of wave power conversion over a wide range of wave periods in deep water. A mathematical model of the...
Use of Scrap Tires to Harness Wave Energy
A 2.5 meter diameter wave powered pump, fabricated from scrap tires was tested from May 24, 1988 to October 1988 in the Atlantic Ocean at the North Carolina Army Corp of Engineers Waterways...
Estimation of Wave Power as an Energy Resource for Hawaii
One of the most important elements in determining the wave power available by means of a wave power extracting device is the amount of wave energy present at a given location during a...
Pre-Experiments of OTEC Experimental Facility for Ocean-Based Mariculture-OTEC Pilot Plant Houyou
The ocean-based mariculture-OTEC pilot plant 'HOUYOU' was completed in March, 1989 and the at-sea test in Toyama Bay was carried out from July 18th until September...
OTEC's subsurface discharges of Deep Ocean Water: Modelling Their Effects on the Primary Production
The French project of a shore-based OTEC pilot plant (5 MW) at Tahiti gave the opportunity of simulating the ecological effects of a small, man-made upwelling in coastal-tropical oligotrophic...
A 250 KW Closed Cycle Land Based Ocean Thermal Energy Plant
The paper describes the design of a 250 KW land based closed cycle Ocean Thermal Energy Plant suitable for installing at Keahole Point in Hawaii. The work is being done for ALCAN International....
Overview: Steam-Water Phase Change in OTEC Systems
This paper presents an overview of the thermodynamics and the heat and mass transfer processes occurring in OTEC systems utilizing seawater as the working fluid....
Seawater Experimental Results of Direct-Contact Condensation for OC-OTEC Applications
Tests of a direct-contact condenser (DCC) for open-cycle ocean thermal energy conversion systems (OC-OTEC) have been conducted using seawater and exchanging up to 1.25 MWth...
Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...
De-Aeration and Re-Injection of Noncondensable Gases in Open-Cycle OTEC
Non-condensable gas exchange characteristics in seawater and fresh water are compared and contrasted. The higher rate of exchange observed for these gases in seawater is incorporated in...
Return to search