Computer Implementation of Seismic Building Codes
The objective of this work is to implement the provisions of building codes current in the U.S. as well as those of other countries for the seismic resistant design of buildings. The work...
Buckling Optimization of Laminate Stacking Sequence with Strain Constraints
An integer programming formulation for the design of symmetric and balanced composite laminates subject to buckling and strain constraints is presented. The design variables that define...
Structural Optimization to Limit Natural Periods
It is necessary to limit the natural periods of some structures to control their response to dynamic loads. Floor systems with natural periods greater than approximately 0.15 seconds may...
Stiffness Optimization Methods for Lateral Systems of Buildings: A Theoretical Basis
The sizing of the members of the lateral resistance system for multi-story buildings is often controlled by stiffness requirements. In order to achieve economical buildings, it is important...
Parallel Preconditioned Conjugate Gradient Methods for Structural Analysis Problems with Multiple Loadings
This paper describes the use of conjugate gradient method for finite element problems with multiple loading cases. Specifically, we introduce a modified conjugate gradient method for the...
A Prototype Distributed Processing System Water Control Data Processing at Tulsa District U.S. Army Corps of Engineers
The Tulsa District, Corps of Engineers operates 50 multi-purpose reservoirs controlling runoff from all or parts of 7 states. These reservoirs are operated for flood control, water supply,...
NEXRAD Input to Real-Time Reservoir Regulation
The Corps of Engineers has a need for radar information to enhance rain gauge measurements in determining average rainfall over a particular basin for hydrological forecast models used...
A Bivariate Stochastic Reservoir Model
A bivariate distribution of peak flows and volumes is derived taking into account their correlation structure. This distribution is then used to derive reservoir operation curves which...
Effect of Storm Distribution on Watershed Stormwater Management
This paper presents a case study illustrating the effect of the selection of rainfall distribution pattern upon the ability of a calibrated rainfall-runoff simulation model to replicate...
Source Identification and Ranking of Wet Weather Discharges in an Urban Area
A study has recently been completed to characterize the pollutant loadings to the Providence River, RI during wet weather conditions. A total of 11 land based sampling stations including...
Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
A New Finite Element Formulation of the Generalized Laminated Plate Theory
The Generalized Laminate Plate Theory (GLPT) predicts stress distributions in laminated composite plates with accuracy comparable to a full three-dimensional analysis. The original implementation...
p-Version Three Dimensional Solid Element for Heat Conduction
This paper presents a finite element formulation for a three dimensional twenty-seven node hierarchical solid element for heat condition where the element temperature approximation can...
Stochastic Finite Element-Based Reliability Analysis of Dynamically Loaded Frames
This paper presents the use of the Stochastic Finite Element Method (SFEM) for reliability analysis of steel frames subjected to dynamic loading, in the context of modal superposition....
Minimum Required Lateral Stiffness of Structures
In this paper an approximate method is presented to calculate the minimum lateral stiffness required to insure global structural stability. The technique is based on setting the critical...
Limit and Post-Limit Behavior of Space Trusses
A numerical technique for the nonlinear analysis of space trusses taking into consideration such factors as load-eccentricity, initial crookedness of the member and nonlinear stress-strain...
A Kinematic Hardening and Softening Model of Concrete
In the present paper, a new loading surface calibrated by several typical uni- and multi-axial test curves is proposed. Following the associated flow rule, a relatively simple constitutive...
Inelastic Mechanisms in Dynamically Loaded Ceramics
The dynamic response of ceramic materials has been the subject of intense research in the past decade. In this paper, we succinctly describe a plate impact experiment of a star-shaped...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Wave Loading Linearization for Offshore Structures
The linearization of Morison-type wave loading is to replace u|u| by cu, where u is a zero mean, stationary Gaussian random process and c is a constant. In the present study an optimal...
Return to search