An Expert System for Stop-Controlled Intersection Design
In 1915, the first stop sign was installed in Detroit, Michigan, but until now, there was still no one coordinated body of knowledge which would dictate design and analysis requirements....
A CADD Program for Simulating Turning Vehicles
The turning capability of one or more 'design' vehicles and their swept paths has a significant influence on the layout of transportation facilities such as roadway intersections, parking...
Engineering: Environmental vs. Developmental Goals
The 1992 winner of the Daniel W. Mead Student Paper competition explores the potential conflict for engineers, between environmental and developmental goals. Noting a dictionary definition...
Analytical Platform Development for Precast Structural Systems
The multi-investigator PRESS (Precast Seismic Structural Systems) research project requires an analysis tool that can be used to perform nonlinear seismic analyses of a wide variety of...
Buildings with Response Control Systems in Japan
Today, there are more than 30 buildings with response control systems. The system is defined as one that suppresses or controls the response to the vibrational motion input of the buildings,...
Input for Seismic Design of Major Structures
Effective seismic input considering the soil-structure interaction or soil-pile-structure interaction is presented. This approach takes the seismic wave as primitive input and considers...
Observed Response of Actively Controlled Structures
Several active control systems have been developed, fabricated, and installed in full-scale structures and they have been subjected to actual wind forces and ground motions. The focus...
GIS Mapping of Earthquake Ground Shaking in San Francisco, California
Severe earthquakes of the last decade in Mexico, Armenia, and the United States have reemphasized the importance of local geologic site conditions in estimating damage and consequent losses....
Dynamic Field Response Studies and Earthauqke Instrumentation of the Meloland Road Overcrossing
Ambient vibration data was obtained at the Meloland Road Overcrossing near El Centro in California by The California Department of Transportation (CALTRANS) as part of a 1978 Federal Highway...
Dynamic Soil-Foundation Interaction at the Meloland Road Overcrossing
Forced vibration tests, using a hydraulic ram device, were conducted on the Meloland Road Overcrossing (MRO) bridge over Interstate 8 near El Centro, California. Dynamic response data...
85 Stories in Kuala Lumpur?The 5th and 6th Tallest Buildings in the World
A concrete core and cylindrical concrete tube structure provides a safe, elegant, efficient and constructible solution to the challenge of designing the world's 5th and 6th tallest buildings,...
Development of Computer-Based Models of Standards and Attendant Knowledge-Base and Procedural Systems
Existing and new technology can be used to develop a new generation of standards that would allow designers to use complex standards efficiently, help standard-writing bodies to detect...
Investigation of Full-Scale Performance of Structures?Research Potentials
It is well known that actual, or true, behavior of completed structures does not necessarily conform to often simplified analysis predictions. This may be due to any of several reasons...
Seismic Strengthening for Structures in Regions of Low Seismicity
Most existing structures were not designed to today's seismic codes and standards, and in fact in low seismicity regions codes did not require seismic design until recently....
Parametric Study of Cable-Stayed Bridges Response Due to Traffic-Induced Vibration
The dynamic response of long-span cable-stayed bridges due to moving traffic loads is investigated utilizing three-dimensional models. Modal analysis is conducted using the deformed dead-load...
Response of Concrete Filled Grid Decks Under Static Loads
This paper briefly discusses the bending strength and stiffness of concrete filled grid decks that are subjected to static loads. The influence of design parameters (traffic flow direction,...
Bridge Engineering and Life Cycle Cost
The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) requires that all Federal Aid projects must 'consider...the use of life-cycle costs in the design and engineering of...
Reliability-Based Expert Systems for Optimal Maintenance of Concrete Bridges
In this paper ongoing research in the CEC supported BRITE/EURAM project P3091 is presented. In the project reliability based expert systems for inspection and maintenance of corroded reinforced...
An Information System on the Performance of Suspension Bridges Under Wind Loads
While most suspension bridges for which information is available, in operation between the period: 1701-1992, have performed satisfactorily under wind loads, a few bridges were destroyed,...
A Reduced Order Model for the Seismic Analysis of Building-Soil Systems
A finite element based, reduced order, numerical model has been developed for the nonlinear analysis of building-soil systems. The reduced order system model employs an equivalent continuum...
Return to search