Concept Development of Small Cask to Large Cask Transfer Systems
Studies for EPRI have been performed by two contractors to develop conceptual designs for small cask to large cask transfers of spent fuel. From the work, two dry transfer concepts and...
Rethinking the Economic factors of Centralized Spent Fuel Storage
The economics of centralizing the storage of spent fuel at a single site, as opposed to continued storage at over 100 reactor sites, has been the subject of several recent analyses. Most...
Design and Operation of a Monitored Retrievable Storage Facility Using NUHOMS? Technology
The NUHOMS dry storage system for spent fuel is now in use at two Independent Spent Fuel Storage Installations (ISFSIs) and a third is under construction. This system can be used for economical...
Economic and Technical Advantages of High-Temperature Processes in High-Level Radioactive Waste Management
The estimated waste management costs incurred for the three principal waste forms produced by reprocessing spent fuel are compared from a theoretical economic standpoint. The cost of vitrifying...
Political Trust's Role in Explaining Nevada Urban Resident's Perceptions of the Proposed Yucca Mountain Repository
This paper examines the key role that political trust plays in explaining repository risk perceptions of urban residents of the Las Vegas metropolitan area. Findings from two surveys of...
Potential Uses of Lead in Nuclear Waste Disposal
In order for lead to be considered as a nuclear waste packaging material, it must be shown that it has adequate corrosion resistance, and that it does not degrade the properties of other...
The Adoption of Mechanized Excavation Techniques for the Superconducting Super Collider
The Superconducting Super Collider (SSC) is the latest and largest in a line of high-energy physics accelerator projects. The five increasingly energetic accelerators which make up the...
Determination of Cost Effective Waste Management System Receipt Rates
A comprehensive logistics and cost analysis has been carried out to determine if there are potential benefits to the high-level waste management system for receipt rates other than the...
Modelling of Excavation, Thermal Loading and Bentonite Swelling Pressure for a Waste Repository
For the performance assessment of a future nuclear waste repository, the excavation of the tunnel and deposition hole, thermal loading from waste heat release and the swelling pressure...
The Radiological Capacity of Transport Casks Loaded in a 2-Region Non-Uniform Pattern
The radiological capacity of spent fuel storage and transport casks can be increased by the use of non-uniform cask loading. There are many possible combinations of spent fuel burnup and...
Toward Linking Demographic and Economic Models for Impact Assessment
One of the objectives of the Yucca Mountain Project, in Southern Nevada, is to evaluate the effects of the development of a high-level nuclear waste repository. As described in the Section...
Forecasting Behavioral Response to a Repository from Stated Intent Data
To forecast repository-induced behavior from surveys of behavioral intention, we develop a model of the relation between stated intent and actual propensity. This model relies heavily...
Circuitous Routings: Integration of Public Acceptability with Technical and Economic Feasibility
Public acceptance of agency plans for shipment of radioactive wastes to disposal facilities may be critical to efforts to site geologic repositories. Local and state participation in route...
Some Political Logistics of Nuclear Waste
The need for a centralized, federal, interim storage facility for nuclear waste, or MRS, alledgedly has become more urgent because the date for the opening of the permanent repository...
Accurate Response Analysis of Seismic Distributed Mass Systems
A dynamic analysis technique of distributed mass structures is presented with a combination of the dynamic load factor approach and the dynamic stiffness matrix method. The dynamic stiffness...
An Electronic Specification for the Earthquake Resistance Design of the Highway Bridges in Pennsylvania
An interactive C program for the seismic design of highway bridges in the state of Pennsylvania is described in this paper. The program was developed in C language on a personal computer....
Computer Implementation of Seismic Building Codes
The objective of this work is to implement the provisions of building codes current in the U.S. as well as those of other countries for the seismic resistant design of buildings. The work...
Strategies Which Permit Multiple Discrete Section Properties per Member in 3D Frameworks
Strategies for discrete structural optimization of 3D steel frames with coupled section properties are presented. These strategies include linearized branch and bound, simulated annealing,...
Damage-Tolerant Design of Deterministic and Nondeterministic Structural Systems
Many structures are exposed to very hazardous environments and they are likely to be damaged during their lifetime. Damage occurrence may cause a dramatic reduction in the safety of structural...
Benchmark Problems for Shape Optimization in Plane Stress or Strain
The purpose of this paper is to bring to the attention of engineers and researchers who are working with finite element shape optimization techniques, the closed-form solutions for a unique...
Return to search