Modal Analysis of Vibration Response for Condition Monitoring of Structures
The response of a structure to load is evidence of what the structure is; of the materials, members, connections and form of the structure. Response is evidence as well of the condition...
Evaluating Damage Detection in Bridges
Several researchers have recently considered using vibration monitoring of highway bridges as a means for detecting structural deterioration. Results to date have demonstrated that the...
A New NDT Device for Comprehensive Pavement Maintenance (Theoretical Aspects)
A new nondestructive testing (NDT) device is being developed to detect some precursors to pavement distress. The principle of operation of the device is based upon the generation and detection...
Integrity Testing of Concrete Elements Using Surface Waves
The Spectral Analysis of Surface Waves (SASW) method is a nondestructive testing procedure which has been extensively used to determine in situ the elastic moduli of soils and pavements...
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Compressive Strength and Characterization of Failure Modes for Polymer Concrete
The effect of aggregate type, polymer content and specimen dimensions on the compressive strength and failure modes of a polyester polymer concrete (PC) was investigated. Two aggregate...
Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...
Structural Characterization of an Articulated-Truss Joint
A first generation space crane articulated-truss joint was statically and dynamically characterized in a configuration which approximated an operational environment. The articulated-truss...
Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....
Mass and Energy Tradeoffs of Axial Penetration Devices on Lunar Soil Simulant
Axial penetration of the lunar surface was performed to collect soil samples with drive tubes and drill cores on the six successful Apollo missions. Although the pile-driving and drill...
Indigenous Planetary Construction Material Through Soil Modification
This paper will discuss the theory of soil modification and its potentials for producing planetary construction materials. The authors will also present the results of prelimnary experriments...
Mechanical Properties of Lunar Soil and Simulants
Investigation of the physical and mechanical properties of lunar soil carried out by the USSR and the USA; both in situ and on returned samples, has resulted in considerable information...
Structural Materials from Lunar Simulants Through Thermal Liquefaction
Thermal liquefaction that allows development of intermediate ceramic composites from a lunar simulant with various admixtures is used to develop structural materials for construction on...
In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...
Analysis of Two Lunar Oxygen Production Processes
Frequently, chemical engineers must evaluate processes, design systems, and size equipment based on a chemical or physical reaction without the benefit of laboratory data or previous industrial...
Materials and Structures Synergistic with In-Space Materials Utilization
The objective of this paper is to clearly demonstrate the significant advances made in recent months toward actual hardware realizations of various concepts for the utilization of in-space...
Mars Mission Designs: Comparing the Near Term Options
The benefits to be derived from manufacturing chemical rocket propellants from native resources on the Martlan surface are so great that it will almost certainly be a component of any...
Return to search