The Behavior of a Building with Shallow Foundations on a Stiff Lateritic Clay
The use of shallow foundations for buildings in Sao Paulo, either on soils of the Tertiary Sedimentary Basin of Sao Paulo (TSBSP) or on those of saprolitic origin is not as frequent as...
Settlement of Compacted Fills Caused by Wetting
Post-construction wetting of fills can cause swell or compression, depending on soil composition and stress conditions just before wetting. The various factors affecting swell/compression...
Case History of a Collapsible Soil Fill
Collapse settlement of a deep compacted fill led to damage of a group of condominium units. The fill consisted of a highly heterogeneous mixture of coarse- to fine-grained soil containing...
Tolerable Deformations
Current criteria for tolerable movements of buildings, bridges and other structures are reviewed. Tolerable values of total and differential settlement, relative rotation, relative deflection...
Subjective De-Biasing of Data Sets: A Bayesian Approach
In this paper, we examine the relevance of data sets (for instance, of past incidents) for risk management decisions when there are reasons to believe that all types of incidents have...
Treatment of Oil in Water Emulsions by Ceramic-Supported Polymeric Membranes
A novel membrane was developed by growing polymer chains from the surface of a porous ceramic support, resulting in a composite membrane which combines the mechanical properties of the...
Evaluation of Fe oxide-coated GAC for removal and recovery of Cu(II) from water
A composite solid, prepared by precipitating an Fe oxide onto granular activated carbon (GAC), was evaluated as an adsorbent for the removal and recovery of Cu(II) from water. Relative...
Chelating Composite Membrane: Its Application in Selective Heavy-Metal Solid-Phase Separation
Selective removal of small amounts of heavy metals from the background of large amounts of innocuous sludge or slurry is a challenging separation problem. Conventional fixed-bed sorption...
Modeling of Chemical Inhibition of Nitrification
This work contains two quantitative structure-activity relationships (QSARs) modeling chemical inhibition of nitrification, one for heterocyclic compounds and one for acetylenic materials....
Colloidal Fouling of Reverse Osmosis Membranes
Experiments on the fouling of thin film composite and cellulose acetate reverse osmosis membranes by aluminum oxide colloids are reported. Fouling was significant at high ionic strengths,...
DBP and Hardness Control by Membrane Filtration
Ultra (UF) and nanofiltration (NF) were evaluated for removal of disinfection by-product (DBP) precursors and hardness from Rio Grande water in New Mexico and Texas. In order to compare...
Treatment of Drinking Water Containing Bromate and Bromide Ions
Granular activated carbon and reverse osmosis nanofiltration and hyperfiltration were examined for both bromate and bromide ion removal using surface treated water in New Jersey. Bromate...
Effects of Molecular Oxygen and pH on the Adsorption of Aniline to Activated Carbon
This paper examines the influence of molecular oxygen and pH on the adsorption of aniline to F-300 Calgon Carbon. Molecular oxygen increased the adsorptive capacity of GAC for anilines...
The Evaluation of Empty Bed Contact Time on the Biodegradation of Pentachlorophenol using an Anaerobic GAC Fluidized Bed
The objective of this research is to evaluate the effects of decreasing the empty-bed contact time (EBCT) on pentachlorophenol and its intermediates utilizing an anaerobic granular activated...
NCASI Experiment Related to Validation of Equilibrium Partitioning (EP) Theory
A review of NCASI's technical studies related to evaluating equilibrium partitioning (EP) theory as it is commonly applied in regulatory setting is presented. Although interim results...
Activated Carbon as a Catalyst for Polymerization of Phenolic Compounds
Previous studies by the principal investigator showed that the increase in the adsorptive capacity of activated carbon for phenolic compounds can be attributed to polymerization (oxidative...
Using the SedBed Monitor to Measure Bed Load
An acoustic distance measuring device (SedBed Monitor) was developed to accurately measure bed surface transects in a sediment and water recirculating flume. From these transects the rate...
Vertical Sorting Within Dune Structure
Sediment transport occurs in natural stream beds at least in part as bed load. These bed forms are typically classified as ripples or dunes depending on the bed morphology and flow conditions....
Visual Investigation of Field Bed-Load Sampling
An instrument for bed load sampling was developed consisting of an underwater video camera for visual observations. This instrument is called the Delft-Nile sampler and its design, efficiency...
Effects of Simulated Ice on the Performance of Price Type-AA Current Meter Rotors
Slush ice readily adheres to the standard metal rotor of the winter Price type-AA current meter and affects the ability of the meter to measure the flow velocity accurately. Tests conducted...
Return to search