Integrated Hydrothermodynamic Study of Browns Ferry Nuclear Plant
The results of hydrothermodynamic analyses and computer models discussed in previous papers are combined to present an integrated study supporting a request for alternative thermal limits...
Analyzing Combined Sewer Overflow Events
The Illinois Environmental Protection Agency/Illinois Pollution Control Board (ILEPA/IPCB) direct that combined sewer system overflows (CSO) be given sufficient treatment including 'first...
Small Canal Discharge Measurement by Thermal Dilution
Thermal dilution is a variation of the indicator dilution flow measurement technique, utilizing heat as the indicator. The measurement is accomplished by performing a heat balance within...
Turbine Efficiency Loss Associated with Draft Tube Aeration
Draft tube aeration is one method for improving the dissolved oxygen content of hydroelectric discharge. A simple analytical procedure is presented for estimating the loss in turbine efficiency...
Biological Evaluation of Angled Screen Test Facility
The paper presents comparisons of model and prototype measurements as a means for evaluating the ability of a physical model to reproduce a geometrically complex prototype thermal intake...
Hydrothermal Model Study of Stratified Flow in a Power Plant Cooling Water Recycle/Intake Canal: Reynolds and Densimetric Froude Number Effects
During the winter of 1983-1984, the control of frazil ice at the trash tracks using pneumatic air guns was evaluated at Danskammer Point Generating Station. This paper presents a brief...
Frazil Ice Control Using Air Guns
The design of the J. H. Campbell, Unit 3, Cooling Water Intake in the late 1970's used some new ideas and concepts in response to a strong concern for fish protection at a...
Make-up and Blowdown of a Cooling Pond
A mathematical model was developed to simulate the operation of a recirculating cooling pond for a planned nuclear power plant in the Midwest. The objective of the pond operation is to...
Automated Measurement of Soil/Water Properties
An automated data-acquisition system was constructed to permit continuous operation of laboratory equipment. The apparatus was used to monitor flow through fine-grained, 'undisturbed'...
Measurement of Hydraulic Conductivity Variation
For a confined, sandy aquifer, the dependence of the horizontal hydraulic conductivity on the vertical coordinate has been measured using single-well tracer injection/recovery experiments....
Littoral Environment Observation Program
This paper presents a method for determining the longitudinal, transverse, and vertical dispersivities of a thick aquifer for a free convection tracer test using only measurements from...
Guideway and Conductor Rail Heating for a Winter Environment
The power and signal conducting rails are maintained using self-limiting heat trace cable in combination with an inherently protected rail. The cable's high inrush power along...
Thermal Design Considerations in Frozen Ground Engineering
Prepared by the Technical Council on Cold Regions Engineering of ASCE. The design of engineering projects in frozen ground requires thermal design considerations...
Techniques for Automating the Process of As-Built Reconciliation
The approach utilizes an electronic digital 'ruler' capable of measuring distances to 100 feet with a resolution of 1/100 of a foot. This ruler interfaces to...
Capability of LMFBR Plant Structures Beyond the Design Base
A study is presented concerning the capability of structures in a loop type Liquid Metal Fast Breeder Reactor Plant, the Clinch River Breeder Reactor Plant (CRBRP), to sustain conditions...
A Flat-Dilatometer Study of Lateral Soil Response
The effect of flat dilatometer penetration on the lateral stress conditions in soil around the dilatometer blade and the soil response against dilatometer diaphragm deflection were investigated...
Automated Walking Cycle for Swinging Ladder Dredge
The unique application of a Swinging Ladder Dredge to perform maintenance dredging in the cooling canal system of the Turkey Point Power Plant demanded the design of a semi-automated dredge...
Acoustic Silt Density Measurement
Significant savings can be achieved on the costs of operations for the deepening and maintenance of navigation channels and harbor basins in muddy areas provided that computations are...
Influence of Roughness on Velocity and Dispersion at Low Flow
Dependence of the hydraulic and transport characteristics of low flow on channel roughness is investigated. Empirical expressions are used to estimate roughness coefficient as a function...
Flow Parameters of Fluid Mud
A set of small-scale, high-resolution velocity and stress sensors based on rugged metal-clad hot wires and epoxy-encapsulated hot films is to be evaluated for its performance characteristics...
Return to search