Improving Dynamic Finite Element Models Using Test Data
A structural optimization based method was developed to improve the finite element model to achieve good agreement with the test results. The modal displacements at critical locations...
Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...
Using a Small Satellite Bus As a Dedicated Platform for On-Orbit CSI Experiments
Control-Structure Integration (CSI) technology will be needed for the success of many future space missions, however, this technology will not be seriously considered for use by program...
Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...
A Conceptual Study of A Solar Power Satellite Using Centrifugal Force
We studied the self deployable Solar Power Satellite (SPS) using centrifugal force in order to explore ways in reducing construction costs. We designed a 340 kW SPS, and studied the unfolding...
Use of GPS for Tethered Satellite Position Determination
This paper provides a description of the potential application of GPS to determine the position of a tethered satellite with respect to the Space Shuttle. Relative positioning is performed...
Thermoelastic Theory of Cylindrical Sandwich Shells with Piezoelectric Sensors or Actuators
Cylindrical sandwich shells with piezoelectric longitudinal and ring elements bonded to the outer and inner surfaces are considered in this paper. Thermal effects are included in the analysis,...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Comparison of Donnell and Higher Order Nonlinear Models for Dynamically Loaded Composite Plates and Shells
The dynamic buckling behavior of composite cylindrical shells subjected to a transverse point load is considered. The behavior of undamped cylindrical shells of varying radii is analyzed...
Dynamics of Laminated Plates with Layer Waviness
Composite structures usually exhibit a high strength-to-weight ratio as compared to traditional structural materials. This makes them attractive solutions in many aerospace applications....
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Nonlinear Analysis of Stiffened Laminated Cylindrical Shells Using the Layerwise Theory of Reddy
The layerwise shell theory of Reddy is used to develop the buckling and the postbuckling equations of circular cylindrical shells reinforced by means of axial and ring stiffeners and subject...
Analysis of Composite Panels Using Newton's Method
Postbuckling response prediction of composite panels using Newton's method will be discussed. The traditional approach of nonlinear finite element analysis is to use a Newton-Raphson approach...
Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Reliability of Structures for the Moon
The subject of risk and reliability for lunar structures is introduced and critical issues deliberated. A tensile structure is considered as an example in order to become more specific...
Design Techniques for Rectangular Lunar Modules
This paper discusses relevant issues concerning the design and performance of cubical lunar modules. Previously, these modules have shown to be a possible solution for living and working...
A Membrane Structure for a Lunar Assembly Building
This paper describes potential design options and construction approaches for the development of an inflatable membrane structure of non-circular cross section. This structure could be...
A New Airlock Approach for Human Exploration
Conceptual design work on the First Lunar Outpost (FLO) mission led to the development of an airlock concept called the `doorlock' which appears quite promising for all aspects of manned...
Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...
Development of a Partial Gravity Lunar Airlock
The Planetary Projects Office (PPO) at the Johnson Space Center is developing design reference missions for human exploration of the Moon and Mars. Missions for both planets require a...
Return to search