Limit States Design of Wooden Formwork for Concrete Walls
Load and resistance factors are developed for ultimate limit states design of wooden formwork components for concrete walls when the lateral concrete pressures are computed using the ACI...
Development of Standards for Slipform & Jumpform Works
Review of past work indicates substantial effort has been made to publish construction standards and guidelines for slipforms but published material pertaining to jumpforms is scarce....
Kinematics and Trajectory Planning for Robotic Excavation
One of the high volume and repetitive construction operations at the construction site is the excavation of soil. Automation of the excavation work requires a robotic system that is able...
Air-Water Transfer: The Role of Partitioning
A review is presented of the role of air-water equilibrium in determining the direction and rate of transfer of chemicals between water bodies and the atmosphere. Because this diffusive...
Oxygen Transfer in Full Lift Hypolimnetic Aeration Systems
A series of experiments were conducted to examine the effect of diffuser depth, diffuser orifice diameter and separator box surface area on oxygen transfer (mg/L), daily oxygen load (kg...
The Structural Curtain
Curtain walls are not standard off-the-shelf items. For major projects, they are almost always custom-designed. Typically, curtain walls are on the critical path of project and often account...
Ultimate Air Rights
The new 1 million sq ft office tower at 450 Lexington Ave. rises from available space between commuter railroad tracks, through the center of a renovated four-story post office and up...
Seismic Surgery Rewarded
By installing isolators in the columns and strengthening the frame, engineers upgraded an eight-story concrete office building in Seal Beach, Calif. so that it should continue to function...
Plastic Highway Bridges
For highway bridges, composites are most effective in cables and decks. Researchers have developed and tested cables and deck sections for strength and fatigue resistance. Link-type cables...
Recent Advances in Seismic Design and Retrofit of California Bridges
This paper describes the damage and lessons learned from the most recent major earthquakes, the resulting bridge seismic design and detailing changes and the seismic retrofit program implemented...
Seismic Design and Performance of Railroad Bridges
Damage to railroad bridges during earthquakes in the United States and Japan is summarized. Research tasks are outlined to develop seismic design and retrofit criteria for railroad bridges....
Earthquake Considerations in Design of the Los Angeles Metro
This paper discusses the earthquake design of the Los Angeles Metro. The design earthquake parameters are presented and discussed in light of the behavior of buried structures subjected...
Seismic Practices for the Air Transportation System: Evolution and Needs
The seismic performance of air transportation systems is reviewed. The evolution of seismic design criteria and practices for major air transportation system elements is discussed. The...
San Francisco Double-Deck Viaduct Retrofits
Following the Loma Prieta Earthquake in October 1989, six double-deck reinforced concrete viaducts in San Francisco were closed because of some isolated damage, and as a precaution for...
Retrofitting Northwest Connector for Seismic Forces
Many pre-1971 bridges in California have inadequate seismic resistance due to non-ductile components or poor connectivity of superstructure elements. Caltrans has finished the first retrofit...
Lifeline Design of Bridges
An analysis and design procedure is presented for retrofitting steel girder bridges that may experience the loss of a pier or column. Multispan and continuous grider bridges are treated....
Scenario for Improving the Seismic Resistance of Pipelines in the Central United States
A number of pipelines transporting crude oil and natural gas to the Midwest and Northeast pass within and adjacent to the New Madrid seismic zone in the central United States. A major...
Telecommunications Facilities Earthquake Readiness Since San Fernando
The vertical rack architecture of telecommunication offices showed some weaknesses during the San Fernando earthquake in 1970. Efforts have been made since then to improve performance...
Seismic Analysis and Design of Buried Piping
Among the causes of damage to buried pipelines due to earthquakes, the one that is most complicated to analytically deal with and that is most credible at safety related sites such as...
Finite Element Analysis of Three-Way Joint of Buried Pipelines Under Earthquake Loads
A quasi-static finite element procedure for the stress analysis of three-way joint of buried pipelines under earthquake loads has been established by quasi-conforming thin circular cylindrical...
Return to search