Behavior of Concrete-Graphite/Epoxy Sections in Composite Bridge Girders
The focus of this work is on the behavior of composite bridge girders constructed from carbon-fiber-reinforced-plastic sections and concrete slabs. The study examines four-point bending...
Sprayed-Zinc Galvanic Anodes for the Cathodic Protection of Reinforcing Steel in Concrete
Corrosion of reinforcing steel bars (rebars), due to penetration of chloride ions from seawater affects the substructure of many bridges in marine service. In a new, low cost control method,...
Evaluation of Partial Depth Spall Repair Materials and Procedures
In 1990, as a part of a Strategic Highway Research Program project (SHRP H-106, Innovative Materials Development and Testing), an investigation was initiated to evaluate the performance...
Embankment Dams
James L. Sherard Contributions
This volume is dedicated to the memory of Dr. James L. Sherard, who made many contributions to embankment dam engineering. Twenty-one of his papers related to this topic were selected...
The Crown and the Curtain Wall
Crowning the complex curtainwall of an 870 ft concrete tower with a 150 ft high crown of aluminum masts in concentric rings above the 60th floor required ingenuity and extraordinary cooperation...
Turning on the Waterworks
A new tunnel, two pumping stations, reservoirs and 150 mi of pipe have 23 municipalities in DuPage County, Illinois awash in Lake Michigan water, ahead of schedule and under budget. Bringing...
Migration of Spilled Oil from Ruptured Underground Crude Oil Pipelines in the Memphis Area
This study evaluated the impact of an oil pipeline rupture in the recharge area of a West Tennessee aquifer. Two potential break locations were chosen in the alluvial valley of a main...
Earthquake Countermeasures for Lifelines in the Central and Eastern United States
Seismic hazards affecting petroleum transmission systems in the Central U.S. and water and gas distribution systems in the Eastern U.S. are discussed. Experience during previous earthquakes...
Forced Vibration Testing of an Expanded Base Concrete Pile
Forced vibration testing of a full-scale cast-in-situ expanded base concrete pile supporting a structural mass was conducted as part of a test pile program for a paper mill expansion at...
Dallas Goes Trenchless
Dallas Water Utilities (DWU) has stopped relying solely on traditional open-cut trenching methods. Instead, we look to trenchless technologies to minimize costs and disruption to the public....
Nonlinear Wave Runup on Large Circular Cylinders
Various design methods for computing nonlinear wave runup on a large-diameter circular cylinder are presented. First, empirical correlations are developed between the observed maximum...
Second-Order Hydrodynamic Interactions Between a Pair of Vertical Cylinders in Irregular Waves
A complete second-order solution is given for the hydrodynamic forces on a pair of bottom-mounted, surface-piercing, vertical circular cylinders in bichromatic seas. The constant structural...
Pipeline Storm Behavior on Clay Soils
A series of transverse wave loading tests was conducted on a specially mounted section of pipe in a sediment-filled tank, to investigate the stability of unburied submarine pipelines under...
Wave Slamming on a Horizontal Circular Cylinder
The present paper describes an experimental study of the wave slamming force on a horizontal circular cylinder located near the free surface. The vertical force on a cylinder and the corresponding...
A New Concrete Armor Unit for Breakwaters: The Beta Block
The aim of this paper, is to present a new artificial block for the protection of breakwaters. This armor unit, named BETA, has been designed and tested in the Coasts and Harbors Studies...
Stability of Accropode(R) and Comparison with Parallelepipedic Block
This paper describes the tests which were performed on physical models with irregular waves, to determine the hydraulic stability of the Accropode(R)...
Skin Friction Distrtibutions on Piles in Sand
Presented in this paper are early results from an analytical investigation of the performance of a closed-ended pipe pile under monotonic axial loading in dense sand. The study was performed...
Review of API Guidelines for Pipe Piles in Sand
Most offshore structures are supported using steel pipe piles which are designed in accord with API Recommended Practice 2A. The guidelines for analysis of axial capacity of steel pipe...
Homopolar Pulse Butt Welding of API 5L Line Pipe
Homopolar pulse welding (HPW) is a welding process that is being investigated as a means to rapidly join API line pipe, having particularly great potential for application in deepwater...
A Fourier Series Solution to Bottom Roughness Induced Stresses During Pipe Laying
Often during installation, a subsea pipeline must be laid along seabed portions with rough profiles. The pipeline is forced by the bottom irregularities to bridge across consecutive protuberances....
Return to search