Groundwater Contaminant Transport at a Hazardous Waste Disposal Site, Pullman, Washington
Groundwater contamination at a hazardous waste site near Pullman, Washington is simulated by a numerical model. The aquifer at the site is classified as an unconfined valley aquifer. Solute...
Optimal Strategy for Aquifer Remediation
A methodology for the restoration and cleanup of existing subsurface contaminated sites and for the contaminant of pollutants is developed. The remediation problem is posed as an optimization...
Optimum Operation of Recharge Basins
Mathematical models based on nonlinear programming are developed for operating recharge basin systems. The objective of these optimization models is to determine the operation policy that...
The Strategic Development of a Sole Source Aquifer to Improve Water Quality While Minimizing Environmental Impact
A water supply project is currently underway which prevents future degradation of a sole source aquifer while providing a groundwater resource with limited usage restrictions. Salt water...
A Comparison of Short Term Forecast Methods for Municipal Water Use
Water utilities routinely develop long range demand forecasts for use in the normal planning activities. In recent years, many utilities have sought to develop more short-term demand forecasts...
Flow Investigation for Landfill Leachate
A two-dimensional unsteady-state moisture flow model has been developed in order to describe the leachate flow process in a landfill. The unsteady variation of leachate mound head has...
The PULSEQUAL Model: Using Combinations of Simple Mathematical Equations to Evaluate Complex Storm Effects on Water Quality
Storm discharges (stormwater and combined sewer overflows) have transient and highly variable impacts on receiving waters. Simple water quality equations have been developed to accurately...
Combined Sewer Overflow Abatement Planning Based on SWMM EXTRAN Modeling
This paper discusses use of the Storm Water Management Model (SWMM), with the EXTRAN block as the hydraulic transport mechanism, as a tool for developing a facilities plan for abating...
Storage of Combined Sewer Overflow: How Effectibe is it Anyway?
The purpose of this paper is to illustrate the importance of modeling long term rainfall records to evaluate the effectiveness of combined sewer overflow storage. This paper will present...
Continuous Simulation Modeling for Sewer Systems
The peaking-factor method of sanitary sewer design was developed to simplify the calculations in determining design flow rates. This method of analysis is conservative to the point that...
Alternatives Analysis Using Two-Dimensional Modeling for the Owensboro Bridge and Approaches
The Federal Highway Administration plans to design and construct a new bridge over the Ohio River near Owensboro Kentucky. A hydraulic model with two-dimensional capabilities was utilized....
Impact of Spatial and Temporal Data Limitations on the Modeling of Runoff Quantity and Quality
A small subbasin within an urbanized watershed (Reno, Nevada) was intensively monitored for runoff quantity and quality. The EPA Stormwater Management Model (SWMM) was applied to simulate...
F. E. Everett Turnpike: An Application of MOSS
MOSS surface modeling software is being used successfully by Fay, Spofford & Thorndike, Inc., on a major project for the New Hampshire Department of Transportation to make improvements...
Designing in Three Dimensions for Manufacturing Facilities
Du Pont Engineering is using Three-Dimensional Design for the design of our manufacturing facilities. Our 3D design system was used on several projects in 1992, and full implementation...
Object Oriented Modeling of Structural Systems
Computational engineering in structural design is no longer restricted to numerical approaches. Increasingly, also non-numerical, in particular, cognitive problems can be implemented into...
Object-Oriented Modelling for Concrete Structures
The use of computers for the design process has reached wide acceptance. The use is developed in several fields such as CAD, CAM or programs for design of structural elements. Recent work...
Object-Oriented Data Exchange for the Integration of Design Processes in Structural Engineering
The computer integration of tasks, activities, tools, user and data exchange interfaces, management of knowledge etc. requires a new approach by object-oriented modeling in civil engineering....
A Model to Quantify Work Space Availability for Space?Contrained Scheduling Within a CAD Environment
In any given process work area, a task or activity requires a specific amount of space for its execution. This required space must be accommodate by the physical space of the work area...
A CAD-Based Construction Simulation Tool Kit for Construction Planning
Current planning and scheduling techniques place considerable reliance on the planners judgement, imagination and intuition. The result of such techniques is typically lengthy text reports...
CAD Applications for Material Handling in the Construction Environment
Research at Va. Tech in the area of dynamic behavior modeling and crane damping have been undertaken. The dynamic behavior modeling capability has been designed to us 3-D CAD models and...
Return to search