A Fatigue Reliability Model for Railway Bridges
A fatigue reliability model is described for safety evaluation of steel railway bridges. The model is a function of six independent random variables and can accommodate different types...
Stochastic Finite Element Analysis of a Damped Beam on Random Foundation and Subjected to Fast Moving Loads
The dynamic effect of fast moving loads on a rail is analysed by the perturbation-based stochastic finite element method. The rail is modeled as an elastic beam resting on the Winkler...
Truck Loading Data for a Probabilistic Bridge Live Load Model
The University of Colorado at Boulder completed a major bridge testing and analysis program for the Federal Highway Administration (FHWA). According to FHWA, this study has produced the...
Calibration of Redundancy Factors for Highway Bridges
The object of this study is to develop a framework for considering redundancy in design and load capacity evaluation of highway bridge superstructures. The proposed method consists of...
Structural Reliability and Proof Testing for Highway Bridges
This paper proposes a set of reliability-based proof load factors for highway bridge evaluation, to determine target proof load and load rating. The target safety index used is consistent...
Probabilistic Evaluation of Bearing Capacity of Shallow Foundations
A probabilistic model is developed to evaluate the bearing capacity of shallow foundations. The bearing capacity formulation proposed by Terzaghi is used but with the bearing capacity...
Bridge Overloading Criteria
Considerable concern is being expressed by the public and government agencies over the deteriorating state of the country's infrastructure. At the same time, there is a general feedling...
A Multiple Presence Load Model for Bridges
This paper utilises weigh-in-motion data to simulate multi-lane traffic crossing short span multiple-lane bridges. In this manner the reduction factors for a multiple lane bridge are derived....
On the Fatigue Loading for Local Components
Fatigue provisions in the North American Codes for design of highway bridges may not be applicable to the design of local components which are subjected to high axle overloads and dynamic...
Live Load Models Based on WIM Data
The objective of the paper is to present the results of weigh-in-motion (WIM) measurements carried out in Michigan. Selected bridges were instrumented and truck weights and axle configurations...
Agricultural Drains and Safety of Dams
Bonny Dam is located in east central Colorado on the South Fork Republican River. The dam's foundation is in the relatively porous Ogallala formation. Throughout the history of the dam,...
Design of Latticed Steel Transmission Structures
This standard,
Pile Installation and Testing at Ningbo Port, China
As part of an ambitious development program at the Port of Ningbo, the People's Republic of China constructed a 694 m (2277 ft) long offshore pier structure to provide a container berth...
Analysis of a Wharf for a Container Terminal
A balanced combination of sophisticated computer programs was employed to model the soil strata, foundation and structure of a wharf for a new container terminal in the Port of Topolobampo,...
Deep Water Container Wharf & Crane Foundation
A deep water anchored steel bulkhead and a parallel-independent low-profile, pile supported crane rail foundation with special stowage areas are discussed from soils investigation, through...
Pile Lateral Load Test in the Port of Los Angeles
Recent wharf projects in West Coast ports have featured rock dikes to contain backland fill and the use of vertical piles embedded in the rock dikes to resist lateral loads. This paper...
Two-Dimensional Hydraulic Analysis of the Owensboro Bridge and Approaches
The Kentucky Transportation Cabinet, Department of Highways, is working with the Indiana Department of Transportation and the Federal Highway Administration to plan, design, and construct...
Probability of Bridge Failure Due to Pier Scour
Methods have been presented for computing the probability of bridge failure due to pier scour either using a maximum scour depth model or a time-dependent model. The probability of failure...
Seattle Swings Again
The 1992 Outstanding Civil Engineering Achievement Award went to a bridge that the experts said couldn't be built�a concrete segmental box girder swing bridge with twin leaves...
OCEA, American-Style
A truly All-American contingent, the nominees for this year's Outstanding Civil Engineering Achievement award span the continental U.S., Alaska and Hawaii. The scope of the...
Return to search