Cyclic Simple Shear, Torsional Shear and Triaxial�A Comparative Study
Many different testing apparatus are used to duplicate in laboratory soil samples the stress state generated in situ by earthquakes. A wide diversity of data has been generated and this...
A Study of Deformations in Concrete Faced Rockfill Dams
This paper presents the results of studies on the behavior of certain concrete faced rockfill dams (CFRD), which were conducted during the Basic Design of Machadinho dam in Brazil. The...
Rational Design of Beam-Columns in Steel
The paper discusses the procedure as currently recommended in the AISC Manual for selection of beam-columns in steel and points to the inadequacy of this procedure for quick convergence...
Particles, Pretreatment, and Performance in Water Filtration
Relationships among raw water quality, pretreatment facilities, and the design of packed bed filters are presented and applied. The particle size, particle concentration, particle surface...
Effects of Streambed Processes on Interaction Between Surface and Groundwater
In open channel systems, the phenomena commonly referred to as 'clogging' is caused by settling of sediment and straining of suspended material as water moves...
Strength of Soils in Terms of Effective Stress
The factors that determine soil strength, such as amount of confinement, density, particle size distribution, mineral friction, aging, particle crushing, and others, produce their effects...
Shallow Seismic Exploration in Soil Dynamics
Methods of shallow seismic exploration of soils are continually developing and evolving. Advances in techniques and equipment for performing crosshole and downhole tests, new data on interpretation...
Richart Commemorative Lectures
The geotechnical specialty known as soil dynamics has developed during the past 25 years from a minor role to a mainstream discipline. Professor F. E. Richart has played a major role in...
Advances in Short Span Steel Bridges
Applying recent research to the design of short span steel bridges can lower their cost and maintenance. Such research involves improved limit state criteria, more uniform lateral load...
An Extreme-Value Model for Strength of Stiff Clays
The role of the distribution function in the safety analysis of soil structures is briefly discussed. Comparison of the two statistical distributions - normal and Weibull - reveals that...
Probabilistic Seismic Analysis of a Nuclear Power Plant Steel Containment
Concern for the safety of nuclear power plants has motivated efforts to determine the statistical characteristics of the seismic resistance of steel containments under various types of...
Preliminary Analysis of Large Penetration Enclosures for Containment Vessels Subject to Beyond Design Basis Loadings
Numerical simulations of the macro-deformations of the sealing surfaces (gasketed junctures) of a PWR steel containment vessel's equipment hatch subjected to accident loadings...
A Pseudo Response Spectrum Method for Mark I Loads
A pseudo base motion response spectrum method is developed to uniquely evaluate the periodic condensation oscillation and chugging drag loads that may occur on submerged structures within...
Stress Distribution Around the Equipment Hatch Opening of a Prestressed Concrete Containment for a PWR Power Station
Results are reported of a finite element stress analysis for the linear elastic deformation around the equipment hatch opening in prestressed concrete containment. The dimensions and form...
Determination of Containment Vessel Ultimate Capacity Using Nonlinear Finite Element Analysis
Analysis of steel containment vessels is normally performed using linear elastic solutions with allowable stresses specified by applicable design codes. This method gives little indication...
A New Approach to the Design of Core Support Structures for Large LMFBR Plants
The paper describes an innovative design concept for a LMFBR Core Support Structure. A hanging Core Support Structure is described and analyzed. The design offers inherent safety features,...
An Estimate and Evaluation of Design Error Effects on Nuclear Power Plant Design Adequacy
An estimate by the author is found of typical error levels contained in Structural-Mechanical-Civil Design and Stress Reports. Based on the original analysis performed to demonstrate design...
Design Criteria for Buried Flexible Pipe
A modified CANDE program was used to analyze a full factorial set of design parameters for buried, large diameter high density polyethylene profile-wall pipe. A new pipe subroutine was...
Limit State Analysis of Lattice Steel Transmission Towers
The background and present status for limit state analysis of lattice steel towers at the Bonneville Power Administration is presented. Conceptual development, a computer program, and...
Plastic Design Requirements of the AISC Proposed LRFD Specification
The American Institute of Steel Construction proposed LRFD Specification (1) has recently completed a one year period of trial use and review. This paper discusses the background of the...
Return to search