Fatigue Strength of Corroded Rolled Beams
Highway and railway bridges fabricated from ASTM A7, A36, and A572 steels will corrode if the paint system is allowed to fail for lack of maintenance. Corroding members lose cross section...
A Method of Computing Impact and Fatigue Life in the Railway Steel Girder Bridge
The purpose of this paper is to investigate the dynamic interactions between an steel girder bridge and a moving freight train. A non-linear, 100-ton, freight car vehicle model and a 70-ft...
Fatigue Behavior of Steel Connection Angles
A method for predicting the fatigue behavior of flange angle elements is presented. The primary emphasis herein concerns an analytical approach for evaluating the fatigue life of flange...
Fiberglas Reinforced Plastic Rebars in Lieu of Steel Rebars
Fiberglass reinforced plastics have recently been introduced in the market in the form of rebars for concrete reinforcement. The light weight, corrosion resistance and non-magnetic properties...
A Summary and Review of Fatigue Data for Mechanical and Welded Splices in Reinforcing Bars
Published reports pertaining to fatigue tests of welded and mechanical splices in reinforcing bars were reviewed. It was observed that most specimens fractured in the reinforcing bar adjacent...
Fatigue Strength of Welded Steel Mesh
Welded steel mesh (WSM) is prefabricated by welding cold-drawn wires in a grid-like mesh. Engineers avoid using WSM as main reinforcement in highway structures due to their lack of knowledge...
Effect of High Frequency Response on Fatigue of Offshore Structures
Welded steel specimens have been tested under several loading spectra to determine the effect on fatigue life of high frequency components in the psd of the stress or strain in the joint....
Development of High Strength Composite Cables
Fiber reinforced composite materials offer significant advantages over conventional materials, for such factors as corrosion resistance, lighter weight, and higher strengths. These advantages...
Looking at the Past
The story of bridge building is related through a look at the bridges of the past, from earliest bridges of record to the latest cable-stayed successes. Progress in bridge development...
Weathering Steel Bridges ? State of the Art
State of the art dissertations on materials that have been in commercial use for over a century are not likely to illustrate major new and innovative breakthroughs. Instead, the state...
Behavior of Externally Prestressed Concrete Girders
A new technique for prestressing concrete girders is presented. The girders are externally prestressed by epoxy-bonding fiber-composite plates to the tension flange of the cambered girders....
Overview of Programs at Sandia National Laboratories
This paper presents on overview of the containment integrity programs at Sandia National Laboratories. Companion papers at this conference give greater details about the construction,...
Stress Analysis of the Liner and Liner Anchorage System Near Penetrations in a Reinforced Concrete Reactor Containment
An overpressurization experiment was conducted on a scale-model of a reinforced concrete containment building. The test was terminated when tears formed in the steel liner. Virtually all...
Development of a Test Validated Methodology for Predicting Concrete Containment Leakage
In the past several years, considerable research effort has been devoted by the Electric Power Research Institute and the U.S. Nuclear Regulatory Commission to the behavior of reactor...
Energy Approach of Earthquake-Structural Design Analysis
A new procedure developed from the earthquake energy concepts is presented in this paper. A short-squat building and a long-slender building are analyzed using the presented procedure....
Fatigue Life Evaluation of Welded Structural Details in Steel Highway Bridge
Stresses in highway bridge members, fatigue crack propagation behavior and long life fatigue strength properties of welded members under traffic loadings and prediction of fatigue life...
Current Bridge Research at Iowa State University
For the past 20 years the majority of the structural engineering faculty in the Department of Civil and Construction Engineering at Iowa State University (ISU) have performed research...
Performance of Steel Sheet Pile Cellular Cofferdams
Steel sheet pile cells are often used as construction cofferdams for structures to be constructed in rivers. Examples of this type of construction include locks and dams, pumping stations,...
Consequences and Achievement of Supplemental Damping for Improved Seismic Performance
An earthquake resistant design philosophy which relies upon increased stiffness and damping rather than increased strength and ductility has been investigated. The effect of adding supplemental...
System Identification of a Large Structure Using Pseudo-Dynamic Test Data
This paper deals with structural modeling and the determination of optimal nonlinear models by applying system identification techniques to inelastic pseudo-dynamic test data from a full-scale,...
Return to search