Bridge Scour Prediction Methods Applicable to Streams in Pennsylvania
The Pennsylvania Department of Transportation, PennDOT, currently owns or maintains in excess of 28,000 bridges over 8 feet in length. The most common type of damage sustained by these...
Evaluation of an Existing Scour Hole at the Castleton Bridge, a Tidal Crossing
Several fathometric surveys conducted in recent years showed a large depression or scour hole on the downstream southeast corner of the central pier of the Castleton Bridge over the Hudson...
Development of Bridge-Scour Instrumentation for Inspection and Maintenance Personnel
Inspecting bridges and monitoring scour during high flow can improve public transportation safety by providing early identification of scour and stream stability problems at bridges. Most...
Using Geophysical Data to Assess Scour Development
The development of scour holes in the Connecticut River near the new Baldwin Bridge has been documented by comparing geophysical records collected before (1989), during (1990), and after...
Local Scour Measurements at Bridge Piers in Alberta
A summary of local pier scour data collected by Alberta Transportation and Utilities (AT & U) over the past 30 years is presented. Several methods used to gather this data are...
Instrumentation for Detailed Bridge-Scour Measurements
A portable instrumentation system is being developed to obtain channel bathymetry during floods for detailed bridge-scour measurements. Portable scour measuring systems have four components:...
Local Scour at Bridge Piers in Alberta?Case History
A two span steel truss bridge with a rectangular concrete central pier was built over the Oldman River near Brocket in south-west Alberta in 1954. Initially the bridge was built square...
Probability of Bridge Failure Due to Scouring
Models to estimate depth of scour at bridge piers and abutments are available in many forms,but all of them are based on constant discharges. Their results vary widely and engineering...
Uncertainty of Bridge Scour Estimates
Pier scour is the erosion of a streambed in the vicinity of bridge pier foundations. In this paper, fuzzy regression is used to develop two pier scour models, one based on crisp laboratory...
The EUR Water Station in Rome?Italy
The paper deals the new steel Water Centre realized by ACEA in Rome. The Water Station is destined to manage the water consumption of around 500,000 inhabitants with an output of 3,900...
Evaluation of Historical Scour at Selected Stream Crossings in Indiana
Geophysical data were collected by means of ground-penetrating radar and tuned transducer systems to estimate the historical scour at ten bridges in Indiana. These geophysical data were...
Relation of Channel Stability to Scour at Highway Bridges Over Waterways in Maryland
Data from assessments of channel stability and observed-scour conditions at 876 highway bridges over Maryland waterways were entered into a database. Relations were found to exist among...
Shale Scour at BNRR Yellowstone River Bridge, MT
Both the Burlington Northern Railroad and Montana Department of Transportation bridges across the Yellowstone river just south of Laurel, Montana, are founded on spread footings placed...
Analysis of Local Scour at Bridge Piers
Many studies have been performed on the cause and effects of local scour at bridge piers, and various prediction equations have been generated based on these studies. The general approach...
Composite Construction?Recent Past, Present and Near Future
The present paper covers a shorter time span. It is divided into three parts: recent past, present and near future. The remarks regarding the recent past are limited to my personal experiences....
New Developments in Eurocode 4
The European Community has initiated the preparation of a set of harmonized structural codes. Eurocode 4 is the code for the design of composite steel and concrete structures. The first...
Composite Beams: Redistribution, Reliability, and Lateral Buckling
Research relevant to three aspects of the design of composite beams for ultimate limit states is summarized. These are: the redistribution in continuous beams and in framed structures...
Highlights of the New ASCE Standards on Composite Deck Floor Slabs
This paper presents highlights of the newly approved and printed ASCE Standard on the design and construction of composite floor deck slabs utilizing cold-formed steel. In 1992 four documents...
Chinese Standard for Concrete-Filled Tube Columns
In this paper an outline is given of the background, the design approach and some principal features of the Chinese Specification for the Design and Construction of Concrete-filled Steel...
European Good Practice in Composite Floor Construction
Previous European experience, research and design for composite slabs with profiled steel decking are discussed. Present efforts to harmonize composite slab design and good construction...
Return to search