Fishery Issues Slow Boardman River Redevelopment
At issue was the requirement of the Michigan Department of Natural Resources (MDNR) and the U. S. Fish and Wildlife Service to require the establishment of fish ladders at the hydro sites....
Seismic Isolation System for a Floating Dry Dock
The seismic isolation system consists of two dolphins, each a relatively large-diameter cantilevered steel pipe pile anchored in Franciscan rock, and buffered connections to the floating...
Steel Poles?Past, Present and Future
When using steel pole structures, construction possibilities are limitless. Of all the options available, tubular steel structures provide the most versatility for transmission line construction....
Lattice Tower Design Using Cold-Formed Shapes
The use of cold-formed shapes in lieu of hot-rolled angles may lead to major changes in the design of lattice transmission towers. The design procedure of the new shapes is more creative,...
Cold-Formed Angles for Transmission Towers
Cold-formed members enable the engineer to design transmission towers that may be more cost-effective than those built with hot-rolled angles. Members can be designed to closely fit the...
Design and Test of Cold Formed Steel Members
Latticed systems represent the most spread and low-cost solution for electrical trasmission towers, when ground conditions do not affect the design choice. Steel angles have been used...
Bolted Connections for Steel Towers
Laced electrical transmission towers require on-site assembly. Consequently, the number of bolts and pieces are important considerations in the total cost of the structures. ASTM A394(1)...
Strain Gaging and Data Acquisition at the TLMRF
Strain gages are the major source of data for the TLMRF (Transmission Line Mechanical Research Facility) research program. Measurement of member loads and bending moments in lattice towers...
Adfreeze Strength of Ice to Steel Pipe Piles as a Function of Temperature
A study was initiated to determine the adfreeze bond strength between steel pipe piles and freshwater ice as a function of temperature. Tests were conducted at an average strain rate of...
Repair Welding of Arctic Offshore Structures and Vessels
This paper describes the welding procedure development for repair or field modifications of offshore drilling structures and vessels made with several different steel grades produced for...
Response of Eccentrically Braced Tall Buildings
The inelastic dynamic response aspects of tall steel buildings with eccentric K-bracing and eccentric X-bracing systems are examined, when subjected to factored El-Centro and computer...
Experience With Workstation-Based Design of Steel Structures
An example is presented of an interactive graphical structural analysis and design system suitable for individual-user workstations. The experience of a corporate engineering services...
Interactive Computer Graphic Seismic Design of Frames
An interactive computer graphics approach for earthquake resistant design of two and three-dimensional steel frames is presented. Analysis and design are possible from code-related equivalent...
How To Design Highway Retaining Walls?A Practical Application of CADD
The recent work developed at the University of Missouri-Rolla (UMR) including optimization algorithms and two computer programs, ODSEWS-2D-II and ODRESB-3D are discussed. Several numerical...
A Problem Oriented Courseware Interface
A program has been created in an attempt to utilize the benefits of the microcomputer in assisting the learning process without invoking the attendance 'black-box'...
Interactive Structural Analysis and Steel Design on the Macintosh
A program has been written for the analysis of two-dimensional structures for the Macintosh personal computer using the Microsoft Basic language. The program takes advantage of the special...
The Mexican Earthquake: A Firsthand Report
The Mexican earthquake of September 19, 1985 was most peculiar, because of the combination of its intensity, regularity, and duration. No other earthquake has had an intensity of IX, at...
Tiedback Walls Untie Intersection
The intersection of Gallows Rd. and Arlington Blvd. in Virginia's Fairfax County required separation. Tiedback retaining walls, which required only 18 in. instead of the 18-22...
Spanning Urban Obstacles
Extension of Pittsburgh's Crosstown Expressway is a � mile portion of a massive $500 million urban highway now under construction. The extension is a complex of five roadways...
Scenic Squeeze
Constructing a four-lane dual highway through the 12 miles of Colorado's Glenwood Canyon involves several engineering innovations: cantilevered roadways, unusual retaining...
Return to search