Selection of ?x and ?t Computational Steps for Four-Point Implicit Nonlinear Dynamic Routing Models
A major step in a successful application of unsteady flow models based on the numerical (four-point implicit, nonlinear finite-difference) solution of the complete one -dimensional Saint-Venant...

Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...

The Concept of Local Euler Number as an Aid for Sizing Pitot Tubes
Correlations with drag coefficients enable determining the relations between the form of Pitot tubes and their velocity coefficients. A numerical example is presented to clear the use...

Scour Inspection Using Ground Penetrating Radar
This paper examines the capabilities of Ground Penetrating Radar (GPR) for river bed scour inspection based on a study carried out by Clarkson University, Potsdam, New York in association...

Three-Dimensional Free Surface Modeling (Is There a Best Approach?)
With the increases in computing power, researchers all over the world are developing and applying three-dimensional (3D) hydrodynamic models. The numerical techniques employed are usually...

Three-Dimensional Variable Resolution Hydrodynamic and Transport Modeling of the Chesapeake Bay System
This paper describes a domain decomposition methodology used in the application of the three-dimensional environmental fluid dynamics code, EFDC, to model hydrodynamics and transport in...

Structure of Coastal Upwelling on a Sloping Bottom
A large eddy simulation of coastal upwelling on a sloping bottom is carried out. The structure of the upwelling consists of a persistent primary front, a temporary secondary front which...

Connection of Grouted Tubular Insert Piles to Soil
Force transfer between offshore production jackets and tubular piles is effected by weld bead shear connectors, acting within the grout filled annulus between the piles and pile sleeves...

Proposal on Story Drift Limit Based on Axial Behavior of Column under Seismic Loads
The main function of columns primarily is to support axial loads both under and after repeated lateral loading from earthquakes. A definition of the story drift limit in any structural...

The Pipe/Soil Stiffness Ratio Variable
This paper reviews the factors which affect the reactions and defines performance limitations of buried flexible plastic pipe as a function of load-induced strains and deflections. The...

Ovality in Pipe Rehabilitation Design
Pipes in need of structural rehabilitation often have longitudinal cracks (at the crown and elsewhere) and exhibit significant ovality (5-10%). When these pipes are lined with current...

Microtunneling with PVC Pipe
PVC is a suitable and economical product for sewer system construction. However, in the past, utilization of PVC sewer pipe in microtunneling was impossible due to axial thrust load limitations...

Townsite Lateral-Stage 2 Belle Fourche Unit - Cheyenne Division Concrete: Pipe with Dumped Bedding and Embedment
In 1933, M. G. Spangler presented three bedding configurations and the concept of a bedding factor to relate the supporting strength of buried concrete pipe to the strength obtained in...

Real World Applications of Pipeline Leak Detection
This paper covers various leak detection methodologies and how they are integrated into the Williams Pipe Line system. Special emphasis is given to the dynamic model method of leak detection...

Analysis of Pavement-Pipeline Systems After Cut Restoration
The placement of utility pipes normally necessitates many cuts and fills of the existing pavements. Integrity of pipeline and compatible performance of cut restoration and original pavement...

Database for Pipeline Bridges in North America
Work began in 1985 at Wayne State University on a research study of pipeline suspension bridges. This effort, which was funded by ANR Pipeline Company of Detroit, Michigan, investigated...

The Load Factor
Spangler's load-factor formula for projecting conduits is generalized to all cases of buried rigid pipe, whether in trenches or under embankments; this is in accordance with the analytical...

Standard Installations: A Synopsis of the ASCE Standard Practice for Direct Design of Buried Precast Concrete Pipe
In 1970, the American Concrete Pipe Association (ACPA) began a long range research program which focused on the behavior of buried concrete pipe. The research resulted in the comprehensive...

Liquefaction Analysis in a GIS Environment
Liquefaction has been identified as one of the seismic hazards that brings great damage to property and infrastructure, and loss of life. The need for liquefaction analysis that works...

Liquefaction Potential of Western Puerto Rico
The historical seismic record, paleoseismic evidence, high population density, time expired since the last major earthquake, and the presence of liquefiable sands and soft clays combine...

 

 

 

 

Return to search