ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Integrity Testing of Concrete Elements Using Surface Waves
The Spectral Analysis of Surface Waves (SASW) method is a nondestructive testing procedure which has been extensively used to determine in situ the elastic moduli of soils and pavements...

A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...

Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...

Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...

Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...

Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...

Structural Characterization of an Articulated-Truss Joint
A first generation space crane articulated-truss joint was statically and dynamically characterized in a configuration which approximated an operational environment. The articulated-truss...

Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....

Mass and Energy Tradeoffs of Axial Penetration Devices on Lunar Soil Simulant
Axial penetration of the lunar surface was performed to collect soil samples with drive tubes and drill cores on the six successful Apollo missions. Although the pile-driving and drill...

Indigenous Planetary Construction Material Through Soil Modification
This paper will discuss the theory of soil modification and its potentials for producing planetary construction materials. The authors will also present the results of prelimnary experriments...

Mechanical Properties of Lunar Soil and Simulants
Investigation of the physical and mechanical properties of lunar soil carried out by the USSR and the USA; both in situ and on returned samples, has resulted in considerable information...

Structural Materials from Lunar Simulants Through Thermal Liquefaction
Thermal liquefaction that allows development of intermediate ceramic composites from a lunar simulant with various admixtures is used to develop structural materials for construction on...

In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...

Analysis of Two Lunar Oxygen Production Processes
Frequently, chemical engineers must evaluate processes, design systems, and size equipment based on a chemical or physical reaction without the benefit of laboratory data or previous industrial...

Materials and Structures Synergistic with In-Space Materials Utilization
The objective of this paper is to clearly demonstrate the significant advances made in recent months toward actual hardware realizations of various concepts for the utilization of in-space...

Mars Mission Designs: Comparing the Near Term Options
The benefits to be derived from manufacturing chemical rocket propellants from native resources on the Martlan surface are so great that it will almost certainly be a component of any...

Power Sources for Lunar Bases
Working and living on the Moon requires artificial power sources both to operate equipment and to maintain life. This paper briefly surveys the power sources designed or proposed to support...

Lunar Mining?Surface vs. in Situ?A Comparative Study
Surface mining and in situ mining are briefly reviewed and compared. It is verified that the inherent advantages of in situ mining over surface ruining point out that in situ mining should...

Telerobotic Field Geologist: Preliminary Results of a Feasibility Study
We conducted three laboratory studies to explore the feasibility of developing a telerobot to perform planetary field geology. In all, 72 college students attempted to match each of 15...

Very Low Frequency Radio Astronomy from Lunar Orbit
This paper discusses the use of very low frequency aperture synthesis as a probe of astrophysical phenomena. Specifically, the science achievable with the Lunar Observer Radio Astronomy...

 

 

 

 

Return to search