Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
Safe-Load-Limit of Plates in Cylindrical Bending
The derivation of a closed-form expression for the viscoelastic critical load of long thin plates undergoing cylindrical bending and made of a linear time-dependent 'solid'-type...
Postbuckling Analysis of Composite Stiffeners under Uniaxial Compression
This paper presents an analytical and experimental study conducted for postbuckling of I-section stiffeners. A stability analysis was carried out to determine postbuckling response of...
Design Considerations for Large-Scale Filament-Wound Composite Structures
An experimental investigation was conducted to quantify scaling effects in filament-wound composite structures. These preliminary results support the notion that an increase in thickness...
Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
Atomistic Simulation and Visualization of Thermal Disorder in a Crystalline Ice
The process of thermal disorder in crystalline ice has been simulated using a molecular dynamics model. The thermal disorder is induced by raising the temperature of the system. The molecular...
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
On Statistical Micromechanical Process Damage Models for Brittle Solids with Interacting Microcracks
Two-dimensional micromechanical damage models with strongly interacting microcracks are presented to investigate the overall nonlinear mechanical responses of microcrack-weakened brittle...
Micro-Damage Process Model for Polycrystalline Ice
This paper presents a micro-damage process model for freshwater polycrystalline ice deforming at the high end of the ductile-to-brittle transitional domain of strain rated. Damage is attributed...
Crack Growth Stability in Ice
The mechanics of stable, time dependent crack growth as a function of geometry and increasing crack length in saline an freshwater columnar ice are examined in this paper. Experimental...
Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...
Numerical Undrained Cyclic Loading Simulations Using the Discrete Element Method
Three dimensional numerical experiments on random arrays of rough spheres were performed using the discrete element method to study the behavior of granular soil and the results were compared...
A Particle Beam Simulation
A two-dimensional beam simulation is developed in which the beam is composed of uniform rectangular blocks. Internal forces in the beam are caused by relative motion between adjoining...
Testing the Limits
More than 100,000 bridges in the U.S. are considered structurally deficient and in need of posted load limits or repair. As the number continues to mount, engineers search for a better...
Plate Load and Pressuremeter Testing in Saprolite
On the island of Oahu, Hawaii, an exploratory tunnel for the Interstate Route H-3 highway was completed in December 1989. The purpose of the exploratory tunnel was two-fold; first to locate...
Settlement of Shallow Foundations in Sands Selection of Stiffness on the Basis of Penetration Resistance
The paper discusses the use of the formulae of the theory of elasticity to compute the settlement of shallow foundations in sands when subjected to static loading. Special emphasis is...
Pressuremeter Stress Relaxation Testing in a Permafrost Tunnel
In the spring of 1988, a geotechnical testing program was carried out in the U.S. Army CRREL Permafrost Tunnel, located at Fox, near Fairbanks, Alaska. In all, some thirty cone penetrometer...
Return to search