R/C Columns Under Axial and Bi-Directional Lateral Loads
The reliability of a model, called a multi-spring model, was examined to simulate the observed response of reinforced concrete columns subjected to varying high axial loads and bi-directional...
Dynamic Response Analysis of Three-Dimensional Beam-Columns
This paper describes a methodology for dynamic response analysis of three-dimensional beam-columns, whereby an elastic force's axial-flexural interaction is modeled with stability...
Free Vibration of Stepped Beams
This paper addresses the free vibration of a stepped Euler-Bernoulli beam using dynamic flexibility methods. The characteristic equation of the system is derived, from which the system...
Using a Linearized Yield Surface in Dynamic Analysis
This paper describes an application of the finite element method to dynamic analysis of systems which exhibit material nonlinearity. A time history approach is used with a central difference...
Computational Failure Analysis of Reinforced Concrete Plate Structures
The paper summarizes our recent effort in developing a suitable finite element code for the failure prediction of reinforced concrete structures. The basis of the development is a plasticity...
A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....
Nonlinear Response of Ground Supported Slabs
Refined techniques for the structural analysis of ground supported concrete slabs are presented. The principles of limit state design in terms of strength and serviceability are implemented....
Characterizing Mode I Fatigue Delamination of Composite Materials
Evaluation of two techniques to characterize fatigue delamination using the double cantilever beam (DCB) specimen are presented. The two techniques were the delamination growth onset (G-N)...
Coupled Bending and Twisting of Thin-Walled Composite Beams
Thin-walled open-section composite material beams of the T, I and J geometries are routinely used as stiffeners for structural components in aerospace vehicles (Starnes et al, 1985). In...
Acoustic Emission Source Locations in Concrete
The location of acoustic emission (AE) sources can potentially provide information on the fracture process zone in brittle materials such as concrete. Typical AE experiments generate very...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Moisture Diffusion in Concrete and Mechanisms of Drying Creep
The Pickett effect is the excess of creep at drying over the sum of shrinkage and basic creep. Several theoretical models have been presented to speculate on the mechanisms of this effect,...
Deformation of Concrete Due to Drying
The deformation of drying concrete is numerically investigated considering the effect of random arrangement of coarse aggregates. The result indicates that a part of the statistical variation...
A Phenomenological Approach to Physico Chemical Phenomena Coupled with Damage in Massive Concrete
This paper presents the first experiments which have been done to support the bases of a thermomechanical model coupled with damage and to identify the characteristics parameters needed...
A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
A Particle Beam Simulation
A two-dimensional beam simulation is developed in which the beam is composed of uniform rectangular blocks. Internal forces in the beam are caused by relative motion between adjoining...
Hurricane Retrofit
Houston's Sheraton Hotel and Convention Center has been retrofitted to protect it from panel pop-out (separation from building curtain walls) and curtain-wall separation from...
Safeguarding History
Even monolithic marble monuments, such as the Thomas Jefferson Memorial, fall prey to materials deterioration. Now, sensitive instrumentation systems can document and analyze even the...
Recapturing Boston's Heritage
Structural upgrading of Boston's Old State House and Faneuil Hall is part of an extensive restoration project undertaken by the National Park Service at a cost of $10.6 million...
Return to search