For the Realization of Lunar Concrete
Since most of the raw materials required to make concrete exist in lunar rocks and soils, concrete is considered as one of the most suitable materials for lunar structures. Author's research...
Production of Lunar Concrete Using Molten Sulfur
A study has been undertaken by the authors and supported by NASA to study the feasibility of using lunar regolith with different binders such as molten sulfur, epoxy or hydraulic cement...
Methodology for Comparing Lunar Settlement Designs
This paper examines a methodology used to compare divergent lunar settlement proposals. It is suggested that the methodology be added to other selection tools for determining which is...
Thermal Regeneration of Spent Lithium Hydroxide
Exploration of planetary surfaces will require portable life-support systems to provide a continuous supply of breathable air. These systems will need to be regenerable in order to support...
Surface Payload Unloading and Deployment Options for a Lunar Return Mission
While planetary exploration studies have focuses on many areas that are critical to mission success, such as landing space transportation vehicles on other planets, a preferred method...
A Generic Inflatable Structure for a Lunar/Martian Base
The first steps in the human expansion into space, which inevitably will occur during the next century, consist of the establishment of a human-tended base on the Moon followed by human...
Carbon Formation Theory for Space Oxygen Processes
Production of oxygen from the Martian atmosphere or lunar soil and the recovery of oxygen in manned space environments may include carbon formation from CO as a unit process. Thermodynamic...
Lunar Base Aspects for Biotechnology Industry
A lunar base can provide unique services to biotechnology research, development, and production. A lunar location as well as the vacuum environment can protect experiments from contamination...
Onboard Image Processing With Transputers
A transputer based onboard computer for planetary vehicles is being designed in the KFKI Research Institute for Particle and Nuclear Physics (RMKI), Budapest, Hungary. In this paper we...
Development of a High Resolution Spectrometer for Measuring the Near-Earth RFI Environment: The First Auto-Correlator in Space
A detailed description of the near-Earth RFI (radio frequency interference environment in the 0.5 - 16.5 MHz range is required before low frequency arrays can be designed and implemented...
Cables Over the Mississippi
As the designer of the Great River Bridge over the Mississippi between Gulfport, Ill. and Burlington, Iowa, Sverdrup Corp., St. Louis, had to find a way to connect the new five-lane crossing...
A Dome For the 21st Century
Putting a circular dome on a square building--the classical architectural design challenge--takes on new proportions at the Federal Building and Courthouse in Charleston, W. Va. The 170...
Debating Steel - Connection Design
The debate about responsibility for structural-steel-connection design is among the hottest engineering disputes of our generation. Meetings have been held on the subject, articles written...
Preserve and Protect
Historic and landmark structures constructed of unreinforced masonry and stone are among the most vulnerable to strong ground shaking and are often subject to possible collapse. For the...
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
The Inelastic Response of an Offshore Platform in Hurricane Andrew
Amoco's Gulf of Mexico South Timbalier 161A platform took a direct hit from Hurricane Andrew in August of 1992, experiencing loads which far exceeded its design load. The platform had...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Nonlinear Collapse of Offshore Jacket Structures
The Joint Industry Tubular Frames Project was established with ten oil industry sponsors to investigate the reserve and residual strength of frames typical of offshore structures. To date...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
High-Strength Concrete Columns in High-Rise Buildings
Strength and ductility of high-strength concrete columns were investigated by examining available test data. The results are summarized in terms of load and ductility capacities of columns....
Return to search