Built-Up Compression Members for Noval Structural Systems
This paper discusses built-up compression members used in novel structural systems for two high-rise buildings: InterFirst Plaza at Dallas Main Center and Columbus Center in New York....
Creep and Shrinkage of Composite Columns in Tall Buildings
The simultaneous presence of steel and composite columns in tall buildings is a common occurrence. The axial shortening characteristics of composite columns are influenced by creep and...
Achieving Level Composite Steel Floors
Constructing deflected composite steel floors that are level is a complex operation, and one which requires cooperation and an exchange of information between the structural engineer and...
Field Measurements of Wind-Induced Pressures on Roofs of Low Buildings
Full-scale measurements have been carried out on an experimental building, 3.3 m high, beside the football field at the Loyola campus of Concordia University. Wind-induced pressures have...
Loma Prieta Response of an Eccentrically Braced Tall Building
Acceleration response records obtained during the October 17, 1989 Loma Prieta earthquake [Ms = 7.1] from the 47-story, eccentrically braced Embarcadero...
What is Optimization?
Basic concepts of optimization are described using design of a plate girder as an example. First, a way to formulate the problem as an optimization problem is presented. Then basic terminologies...
How to Optimize Steel Frameworks
This paper presents the details of a design synthesis strategy to conduct computer-automated design of least-weight structural steel frameworks, where members are automatically sized using...
Development in Criteria for Dam Corrective Actions
Reviewed is the recent history of the Bureau of Reclamation (Reclamation) Safety of Dams (SOD) Program. Particularly, the development of decision philosophies and technical approaches...
Transactions of the American Society of Civil Engineers 1992
IVHS: The Invisible Revolution
Federal funding for intelligent vehicle highway systems has increased a hundredfold since 1989, from $2 million to almost $200 million. Transportation planners are looking increasingly...
Site and Facility Waste Transportation Planning Documents (SPDs): Status and Findings
Site and Facility Waste Transportation Services Planning Documents (SPDs) are detailed desk-top reference documents that initiate planning for shipping commercial spent nuclear fuel (SNF)...
U.S. Nuclear Regulatory Commission Staff Technical Position on Investigations to Identify Fault Displacement Hazards and Seismic Hazards at a Geologic Repository
This paper outlines the guidance provided to the U.S. Department of Energy by the Nuclear Regulatory Commission (NRC) staff in its Staff Technical Position (STP) on appropriate investigations...
The Sellafield Repository Project as Seen by the Public?A Comparison of Research Techniques
To see one's organisation through the eyes of others, to monitor that view and to amend it if necessary, is the primary role of the public relations and public affairs function in an establishment....
Installation and Routing of Critical Embedments at the Hanford Waste Vitrification Plant
During the preliminary design phase of the project, a study was conducted to develop concepts for routing embedded piping and conduit between the remote cells and the service corridors...
Mechanical Design of the Storage Tubes in the HWVP Canister Storage Building
Canisters of high-level waste from the Hanford Waste Vitrification Plant (HWVP) will be stored in an adjacent facility, the Canister Storage Building (CSB). The canisters are stored vertically...
High-Level Radioactive Waste Transportation Operations and Routing Regulations: Friend or Foe?
The process of shipping high-level wastes and its equivalents is a highly-regulated endeavor. Safety requires consistency and rationality thereby giving way to Federal preemption in the...
Findings of the Secretary of Energy Advisory Board Task Force on Radioactive Waste Management
Secretary of Energy James D. Watkins created the Task Force on Radioactive Waste Management in April 1991. He asked the group then to recommend measures the Department might take to strengthen...
A Formal Communication Process: Pathway to Improved Policy Making
This paper will examine the efforts made and the steps taken by the U.S. Department of Energy's Office of Civilian Radioactive Waste Management (DOE/OCRWM) to establish and keep open lines...
Two-Way Communication: A Case Study in Improving Public Interactions
Successful public interaction requires several key elements. They include: a non-intimidating forum for exchanging information, two-way communication, advance preparation to identify what...
Using an Engaging Approach to Products to Help Create Long-Term Credibility
A long-term, thorough and engaging public information products plan is essential for supporting interaction between Nevadans and the scientists and staff on the U.S. Department of Energy...
Return to search