Seismic Strengthening for Structures in Regions of Low Seismicity
Most existing structures were not designed to today's seismic codes and standards, and in fact in low seismicity regions codes did not require seismic design until recently....
Seismic Assessment and Renovation Study for Highway Bridges
This paper is concerned with hazards mitigation on highway bridges due to earthquake ground motions. Damage to transportation systems may occur if the acting faults of May-Shan and Tsu-Kou...
Concrete Arch Bridges for Supporting Steel Conduits of Mingtan Pumped Storage Project
For the Mingtan Pumped Storage Project of an installed capacity of 1600 MW, two parallel waterways have been constructed for conveying flows between the upper reservoir and the lower reservoir...
Design of the Main Bridge of the Huachiang Bridge
The Huachiang Bridge will be reconstructed by erecting the deck structure in two steps to avoid reducing or interfering with the bridge's traffic flow. Both the analysis and the detailed...
Developing a New Construction Policy for Bridge Management
The SHRP Program and other rehabilitation strategies are based on extending the life of concrete bridge elements. In the Bridge Inventory are a number of bridges that must be reconstructed....
Proof Loads in LRFD Format for Bridge Evaluation
Proof load testing is considered as a reliable approach to evaluation of an existing structure's load-carrying capacity. It can be effectively used for highway bridge evaluation, to either...
Development of Bridge Load Model for LRFD Code
The load models are based on the available statistical data on dead load, truck loads and dynamic loads. The paper deals mostly with the static live load. The model is derived from truck...
Bridge Engineering and Life Cycle Cost
The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) requires that all Federal Aid projects must 'consider...the use of life-cycle costs in the design and engineering of...
Optimal Design of Building Structures Using the Predetermined Sections
A practical optimization algorithm for the member design of building structure is presented in this paper. The emphasis is particularly concentrated on the practical applicability of the...
Reliability-Based Design of Transmission Towers Under Wind and Ice Loadings
This study suggests a practical but rational approach for the development of reliability-based LRFD criteria for transmission towers under wind and ice loadings in Korea. Based on available...
Floor Response Spectra Analysis Including Correlations of Multiple Support Motions
This paper deals with the response spectrum analysis method of the secondary structures including the correlation effects between nonuniform support excitations. Based on the random vibration...
Development of an Improved Rapid Seismic Analysis Procedure
New developments in computer capabilities and lessons learned from recent earthquakes have facilitated improvement of the Rapid Seismic Analysis Procedure (RSAP) currently specified in...
New Views for Modeling Dynamic Response of URM Buildings
Various computational models are used to depict seismic response of an unreinforced masonry building that was subjected to the 1989 Loma Prieta Earthquake. The worthiness of various analytical...
Finite Element Analysis of a Highway Bridge Hinge
A highway bridge hinge is a very important element in bridge design. It releases thermal stresses that may be developed in the superstructure or the substructure of a bridge. A common...
Seismic Design of Steel Beam-to-Box Column Connections
This paper is a study of the ductility requirements of steel beam-to-box column connections using the bolted beam web and welded beam flange details. Since the beam moment at the connection...
Behavior and Design of Angle Connections Subjected to Cyclic Axial Force and Shear
The objectives of this study were to establish cyclic behavior of double angle shear connections subjected to axial load and to develop design recommendations. Five cyclic tests of double...
Recent Successes in Welding Jumbo Shapes
A rather unique structure utilizing jumbo shapes was recently designed and fabricated. The structure was 100% welded according to the specifications for welding jumbo shapes recently developed...
Design Property Values of Wood-Based Materials in LRFD Format
The development of a U.S. Load & Resistance Factored Design (LRFD) specification and supporting documents for engineered wood construction is nearing completion. The two key components...
Design of Connections in Wood Structures: LRFD vs. ASD
This paper provides a comparison of connection design capacities using load and resistance factor design (LRFD) procedures and allowable stress design (ASD) procedures....
Wood Diaphragm Design Capacities in LRFD Format
Wood diaphragms (horizontal and vertical) have performed well in resisting and transferring lateral forces imposed by major wind and seismic events. Resilient (ductile) behavior of wood...
Return to search