Stochastic Finite Element-Based Reliability Analysis of Dynamically Loaded Frames
This paper presents the use of the Stochastic Finite Element Method (SFEM) for reliability analysis of steel frames subjected to dynamic loading, in the context of modal superposition....
Nonlinearities and Imperfections in Creep Stability
The effects of material and geometric nonlinearities and imperfections on the 'safe-load-limit' and the 'safe-service-period' of structures...
Tensile Failure in Concrete by Spallation
Plate impact experiments were performed on concrete specimens to study tensile failure at high strain rates. For tensile stress pulse durations of 1.5 and 2.2 ms the threshold stress for...
On Isotropic and Anisotropic Damage Variables in Continuum Damage Mechanics
The present work analyzes the implication and limitation of some 'scalar damage' models. In particular, the elastic-damage thermodynamic potential and the 'effective...
Healing or Negative Damage in Concrete
The deformation of concrete may be attributed to damage or the evolution of microcracks and to mechanical healing or the closing of microcracks. For damage, dissipation is positive but...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Three-Dimensional Finite Element Analysis of Stress and Activation in the Heart
A finite element (FE) method has been developed for three-dimensional (3D) analysis of stress distributions and activation patterns in the left and right ventricles of the canine heart....
Biomechanical Model of a Lumbar Intervertebral Joint?A System Approach
This study was conducted to determine the forces sustained by the lumbar ligaments under flexion-compression using a two-dimensional equilibrium model. The lumbar motion segment was modeled...
Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
Vibration Suppression Through Liquid Oscillations
A passive liquid-motivated control system is proposed to suppress and reduce the lateral drift of high-rise buildings. The vibration reduction mechanism relies on liquid motion to alter...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
A Mixture Finite Element for Reinforced Concrete
A semi-analytical finite element is presented for analyses of cracked reinforced concrete (RC) structures including bond action between rebar and concrete, and crack-face shear transfer....
Interlaminar Fracture Toughness Test: Traditional and Modified
For brittle, transversely isotropic, composite materials we have developed an alternative Mode II interlaminar fracture toughness test (GIIc) that...
On the Adhesive Strength of Viscoelastic Fibrous Composites
A methodology for solving problems of anisotropic materials using the theory of elasticity (viscoelasticity) is presented. Some results on specific problems related to the stressed-and-deformed...
Statistical Strength Analysis of Composites
A new modified six parameter Weibull distribution model has been adopted to analyze strength data structure of ARALL laminated and graphite-epoxy composites. This model shows better correlations...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
Bond Strength of Reinforcing Bars in SIFCON
This paper presents a brief summary of an ongoing investigation on the bond characteristics of deformed reinforcing bars embedded in a SIFCON matrix. A significant increase in bond strength,...
Mixture Considerations for High Performance Cement-Based Composites
In the present paper, mixture considerations for producing high performance cement-based composites are discussed. Effects of different factors such as grain size and fiber reinforcement...
Return to search