Numerical Simulation of Dynamic Shear Transfer
This study was focused on the dynamic response of concrete interfaces under the effects of impulsive loads, and the relationship between the interface shear transfer and the response in...
Nondestructive and Destructive Testing of a Three Span Skewed R. C. Slab Bridge
A three span, skewed, reinforced concrete slab bridge was field tested to destruction by the authors. Before the actual destructive test, nondestructive tests were performed to determine...
Simulated Field Trials of Non-Destructive Concrete Test Methods for Highway Structures
The data presented results from a two year Strategic Highway Research Program investigation into suitable NDT methods for determining the early age, and residual strengths of highway structures....
Nondestructive Crack Identification by Acoustic Emission Analysis and Ultrasonic Frequency Response
Nondestructive evaluation (NDE) by the acoustic emission (AE) analysis and the ultrasonic testing (UT) on the spectral (frequency) response is studied to identify crack geometry. AE waveform...
Review of NPP Concrete Degradation Factors and Assessment Methods
Degradation of concrete in nuclear power plant (NPP) structures can be an age-related phenomena. Several research programs have been initiated by the U.S. Nuclear Regulatory Commission...
Pullout Testing of High-Strength Concrete Members
An experimental investigation of a high-strength concrete mixture was undertaken to measure and evaluate pullout and compressive strength properties. Two columns, a slab, and cylindrical...
Concrete Surface Characterization Using Optical Metrology
The displacement of the surface of a concrete specimen is measured as it cures using an optical method. This method, known as optical metrology, is one in which a line is projected onto...
Shrinkage Measurements in Composite Beam Slabs
When the concrete slab on a composite beam shrinks, it is restrained by the steel beam to which it is connected. Tensile stresses, as a result, are developed in the restrained concrete...
Collective Excellence
Building Effective Teams
Double Diamonds: New Brand for a Texas Bridge
Double diamond towers, distinctive as a cattle brand but tall as a 44 story building, have reached landmark status on the Texas Gulf Coast even though the bridge they will carry won't...
Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
On the Role of Experimental Mechanics in Assessing the Performance of Concrete
The role of experimental mechanics in material characterization, design, construction, performance evaluation, repair, rehabilitation and finally destruction of concrete structures is...
Quantitative Stereology of Concrete Microcracking
Stereological methods enable extrapolation of quantitative microcrack characterization from two dimensions to three dimensional space. However, because these quantifying techniques are...
Fracture Surface Characterization of Concrete
The objective of this paper is to characterize fracture surfaces of concrete, with varying maximum aggregate sizes dmax, by utilizing the concept...
Experimental Determination of the Relation Between the Damaged Zone and the Aggregate Size in Concrete Through Acoustic and Mechanical Techniques
The size of aggregates in concrete has an influence on the behavior of the material. The width of the localized band can be related to this characteristic. Different experimental techniques...
Behaviour of Prestressed Concrete End Blocks
This paper briefly reports on a series of experiments carried out on strip-loaded prestressed concrete end blocks. The results show that corresponding design methods presently used in...
Use of Hierarchical Lattices for Predicting the Fluid or Stress Transfer in Concrete
Hierarchical lattices are used to study the influence of local disorder on the transfer of properties (stresses, strains, permeability) from the micro-scale to the macro-scale. They are...
Wavelet Transform Analysis of Several Transient or Nonstationary Phenomena in Engineering Mechanics
Several examples of the use of a wavelet transform in the analysis of transient events in mechanical systems are provided. The transform has the advantage over other transient analysis...
Debonding of a Inhomogeneity from a Plastic Matrix
Inclusion debonding is addressed through the formulation and solution of the planar elastic and elastic uniform plastic problems. These problems are variants of the standard transformation...
Characterization of Granular Material Composite Structures Using Computerized Tomography
The behavior of particulate composites such as asphaltic concrete is controlled by microstructural features including particle and binder arrangements, interparticle contacts, and changes...
Return to search