Ambient Vibration Tests of a Suspension Bridge
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM5, October 1978, pp. 983-999...

Wind Bracing
This chapter discusses the structural design of the bridge with regards to wind forces....

The Abutments and the Structural Defect
This chapter discusses the bridge's abutments....

New Piers for an Old Bridge
Placing new piers under an old superstructure has saved the architecture of the historic Ashley River Bridge in Charleston, S.C. In July 1987, an inspection indicated deterioration and...

Load-Permit Truck Operations in New York State
This paper presents the results of a survey of indivisible-load permit vehicle operations in New York State. The survey was conducted in the context of an investigation into the impacts...

Expressway Centerpiece
The center span of the Napoleon Bonaparte Broward Bridge, better known as the Dame Point Bridge over the St. Johns River at Jacksonville, Fla., is the country's longest cable...

Behavior of Plates Under Partial Edge Loading
This paper addresses one of the common problems in designing thin-walled members, the ability of the shape to accommodate in-plane concentrated loads. Specific areas in which the problem...

Hysteresis Studies Including Post Buckling of Angle Web-Members for Truss-Type Girders
The paper presents analytical studies of the buckling capacities and hysteresis behavior of angle-web members of truss-type girders. The eccentricity between the loading point and the...

Notable Unbuilt Bridges
In the examples of unbuilt bridges discussed, many different ideas and concepts have been proposed. Most appear to be basically sound in nature, although rather innovative and daring....

Aestetics of Bridges Constructed by Dopravni Stavby, Olomouc, Czechoslovakia
A survey of bridge concepts built in recent years by the State Enterprise Dopravni Stavby, Olomouc that ranks among the largest building trade firms in Czechoslovakia. This firm chooses...

Beautiful Bridges and Highways in the West
This paper recounts 75 years of progress in the design of aesthetic bridges and highways in the west. Not a new idea, there are numerous existing examples showing that the goal of good...

An Optimal Design of Steel Pipe Pile Foundation
This paper presents an optimal design method for the steel pipe pile foundation of bridge pier using a nonlinear programming. It is firstly assumed that an imaginary wall model behaves...

Optimization of Cable Prestresses of Cable Stayed Bridges Based on Minimum Strain Energy Criterion
In this study, an attempt is made to determine the optimum cable prestresses based on the strain energy criterion. The validity of the strain energy criterion on the optimum cable prestresses...

Two-Level Optimization of Nonlinear Structures
This paper presents several optimization design problems and their applications to both cable structures and geometrically nonlinear braced-rib arches. The sum of squares of residuals...

BABE: An Expert System for Structural Design of Bridge Abutments and Piers
A knowledge-based expert system named 'BABE' (Bridge and Building Evaluation) has been developed for the purpose of helping the user in planning, analysis and...

Polymer Concretes
Polymer Concrete (PC) is prepared by using polymeric materials to bond inert aggregates in a fashion similar to that of Portland Cement in the preparation of Portland Cement Concrete (PCC)....

Testing of Reinforced Concrete Bridges for External Reinforcement
Several continuous reinforced concrete slab bridges were constructed in the 1950's with spans ranging from 30 ft. to 60 ft. Longitudinal cracks were observed in the tension...

Fatigue and Fracture Evaluation of Riveted Bridge Members
Among the major concerns of bridge engineers today are the fatigue damages that have been accumulated in riveted members and the safety of riveted structures. Many of these structures...

Fatigue Strength of Corroded Rolled Beams
Highway and railway bridges fabricated from ASTM A7, A36, and A572 steels will corrode if the paint system is allowed to fail for lack of maintenance. Corroding members lose cross section...

A Method of Computing Impact and Fatigue Life in the Railway Steel Girder Bridge
The purpose of this paper is to investigate the dynamic interactions between an steel girder bridge and a moving freight train. A non-linear, 100-ton, freight car vehicle model and a 70-ft...

 

 

 

 

Return to search