Numerical Solution of Transient Closed-Conduit Flow Equations by the Method of Lines Along Characteristics
The method of characteristics has long been considered as a natural technique for solving transient closed-conduit problems. In this paper, by using the concept of the method of lines,...
Laplace Valve Stroking to Control Water Hammer
The method of Laplace valve stroking to control water hammer is presented. Attention is directed to the most frequently encountered of the simple systems: a single pipe originating at...
Drag Characteristics of Coarse Sediment in Clay Suspensions
Drag characteristics of spherical particles in clay suspensions, such as coarse sediment in hyperconcentrated flows, has been analyzed by using a limited data available in the literature....
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Regulation of Flow Downstream of Weirs
Reregulation weirs are one means adopted by the Tennessee Valley Authority (TVA) to provide continuous improved minimum flow and wetted area for aquatic life downstream if hydroprojects...
Prediction of Filtrate Turbidity by Parameter Estimation
In order to operate the rapid sand filter in response to the time variation of effluent quality, a model and a procedure to predict the filtrate quality of rapid sand filters have been...
Friction Loss Equations for Hydropower Facilities
Many water suppliers are pursuing economic benefits from water supply and distribution systems through development of hydropower facilities on pipelines. Excessive pressure head that used...
Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
Methods for Prediction of Maximum Scour at Coastal Structures
The most common coast scour-related problems are toe scour at rubble mound structures and vertical seawalls, and scour at the base of piles and horizontal pipelines. Existing scour prediction...
Scour Inspection Using Ground Penetrating Radar
This paper examines the capabilities of Ground Penetrating Radar (GPR) for river bed scour inspection based on a study carried out by Clarkson University, Potsdam, New York in association...
Connection of Grouted Tubular Insert Piles to Soil
Force transfer between offshore production jackets and tubular piles is effected by weld bead shear connectors, acting within the grout filled annulus between the piles and pile sleeves...
The Connecting Method of Steel and Concrete Using Long Deformed Bar Studs
A new welding technique for long horizontal studs of 19 mm and 22 mm diameters was established. The transmission of shearing and bending forces was evaluated using large model tests. Actual...
Microtunneling: Overview and Case Study
Microtunneling is defined in the United States as a remotely controlled, laser guided pipe jacking process, which does not require personnel entry. This paper describes the components...
The Pipe/Soil Stiffness Ratio Variable
This paper reviews the factors which affect the reactions and defines performance limitations of buried flexible plastic pipe as a function of load-induced strains and deflections. The...
Ovality in Pipe Rehabilitation Design
Pipes in need of structural rehabilitation often have longitudinal cracks (at the crown and elsewhere) and exhibit significant ovality (5-10%). When these pipes are lined with current...
Sliplining: Design and Installation Considerations for Polyethylene Pipe
The design methodology and installation procedure for polyethylene slipline renewal are discussed. When designing there are two critical phases which must be considered: (1) short-term...
Trenchless Diversity Fuels Growth of Construction Activities
This paper describes a variety of trenchless technology methods of reconstructing America's decaying pipeline infrastructure by using minimum and /or 'no-dig processes'. The decay of our...
Microtunneling with PVC Pipe
PVC is a suitable and economical product for sewer system construction. However, in the past, utilization of PVC sewer pipe in microtunneling was impossible due to axial thrust load limitations...
Townsite Lateral-Stage 2 Belle Fourche Unit - Cheyenne Division Concrete: Pipe with Dumped Bedding and Embedment
In 1933, M. G. Spangler presented three bedding configurations and the concept of a bedding factor to relate the supporting strength of buried concrete pipe to the strength obtained in...
Flow Study of In-Service Sanitary Sewers Rehabilitated with Insitupipe
In an effort to define the flow characteristics of sanitary sewer segments rehabilitated with Insituform under normal in-service conditions, Insituform of North America, Inc. (currently...
Return to search