ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Pore Pressure Effects in Borehole Shear Testing
The effects of excess pore pressures on shear strength results obtained using the Borehole Shear Test (BST) were investigated. Pore pressures were measured during the consolidation, shear,...

Effect of Cementation on the Cone Penetration Resistance of Sand
A laboratory study was conducted to investigate the effect of cementation on the cone penetration resistance of sand. A new apparatus to form homogeneous artificially cemented sand specimens...

The Mudslide Profile Method to Measure the Undrained Shear Strength of Muds
Mudslides have been reported to have a very distinctive profile. Using this distinctive profile, a method is presented to analyze the stability of the mudslide at limit equilibrium conditions....

Vane Shear Testing for Staged Construction
Staged construction was used for the earthfill embankment of Birch Dam in order to compensate for low strength clays in the foundation. Sampling and testing of foundation soils verified...

Analysis of Liquefaction Potential by Insitu Testing
This paper describes the results of insitu testing performed to assess the liquefaction potential of a sand formation at a site for a proposed large industrial facility in East Central...

Effctive Stress Interpretation of In-situ Tests
Significant differences in terms of load-settlement curves obtained from Plate Load Tests (PLT) and q//c profiles obtained from Static Cone Penetration Tests (SCPT) at two sites with different...

Fast, Economical, Cone Testing of River Sediments
The objective of the study reported was to obtain quantitative geotechnical information over many square miles of Hudson River bottom. A hand held cone penetrometer was selected for use....

In Situ P and S Wave Velocity Measurement
A review of the in situ techniques to measure P and S wave velocities by seismic wave propagation is presented. A relatively new technique, the suspension PS logging method, is described...

In Situ Tests for Foundation Vibrations
There are several well established methods of determining shear modulus in situ and these are summarized in this paper. New techniques are being developed for in situ determination of...

In Situ Tests on a Florida Peat
A geotechnical exploration program at a site predominated by surface peats has been performed. The study encompasses the performance of in situ field tests and laboratory soil tests. Field...

Effect of Particle Size on Sludge Dewaterability
Using a modified Buchner funnel apparatus to measure specific resistance and a sequential centrifugation/filtration procedure to fractionate a sludge, it was possible to more precisely...

Effect of the Fluid Velocity on the Biofilm Development
In order to get basic information concerning the application of a biological treatment to the ammonia nitrogen removal from drinking water, we considered the relation between the biofilm...

Physical Habitat Simulation and the Moveable Bed
One objective of an instream flow analysis is to quantify a flow that will maintain the existing channel and/or flush fine material from the bed. Five empirical approaches to determine...

ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...

Evaluation of the Seismic Performance of Buildings
The aim of the paper is to present the different existing methodologies available for the assessment of seismic damage to buildings. The approach aims towards the development of a mini-computer...

Techniques for Estimating Earthquake Probable Loss for Buildings and Contents
The probable maximum loss (PML) is useful for quantifing the seismic risk exposure of a facility and for rational decision making regarding earthquake insurance and seismic strengthening...

Rapid Identification of High Risk Building in Seismic Regions Using Expert Systems
Seismic risk evaluation is a complex problem because it involves many factors such as ground motion, ground failure potential and structural performance with great uncertainties. Many...

Seismic Risk Analysis of a Multi-Site Portfolio of Buildings
A discussion of a methodology that permits the assessment of the seismic risk associated with a group of buildings and incorporates relevant aspects of seismic hazard assessment including...

Structural Optimization Under Conditions of Uncertainty, with Reference to Serviceability and Ultimate Limit States
Probability concepts and methods are rapidly gaining ground in the search for more rational approaches to structural optimization. Under conditions of uncertainty, the risk of unfavorable...

Structural Monitoring Concepts for Arctic Pipelines
Terrain instabilities producing differential soil movements are the predominant features affecting the structural integrity and design of buried pipeline systems in the arctic. Current...

 

 

 

 

Return to search