Some Applications of Neural Networks in Structural Engineering
After a brief discussion of neural networks and their potential engineering applications, the author's on-going research in application of neural networks in structural engineering will...

How to Optimize Light-Gage, Cold-Formed Steel Beams
The Illustrative Examples section of the AISI Cold-Formed Steel Design Manual (AISI 1989) demonstrates how to analyze a number of different cold-formed steel sections. This paper applies...

Structural Analysis for Structural Design
This paper presents a simple extension to conventional structural analysis that serves to provide additional information that is of significant use to the structural design process. Specifically,...

Computer-Aided Structural Engineering Software: The Status of Concurrent Engineering
Concurrent engineering encompasses computer-aided engineering (CAE), multidisciplinary CAE (MCAE), computer-aided design and drafting (CADD), computer-aided manufacturing (CAM), computer...

Assessing Effects for Disposal Sites off San Francisco
A simple particle tracking model has been used to estimate the size of deposition footprints and transient turbidity effects in the water column resulting from disposal of dredged material...

A New LAX-WENDROFF Algorithm to Solve the Bed Continuity Equation With Slope Effect
The numerical simulation of mobile bed evolutions of seas, estuaries and rivers requires a morphological model, including the effects of waves, currents and sediment transport, as well...

Nowcast System Development for the Straits of Florida
As part of the inaugural program for the Ocean Pollution Research Center at the University of Miami, a nowcast system is being developed for the Straits of Florida. The nowcast system...

The Politics of Nuclear-Waste Disposal
Spurred by federal and state legislation recommending local disposal of low-level radioactive nuclear waste, the Illinois-Kentucky Compact announced plans in the mid 1980s to build a disposal...

Airport Terminal Design Challenges
In February 1989, the Metropolitan Washington Airports Authority began the process of designing and constructing a new terminal at Washington National Airport to address the needs of its...

Dulles International Airport Construction Challenges
The expansion of the Main Terminal at Dulles International Airport was anticipated and planned for during the original construction of the building in 1962. The most difficult portions...

The Use of Crumb Rubber Modifier in Hot-Mix Asphalt
This paper summarizes the literature on the use of CRM as an additive in HMA. Wet and dry processes are discussed and the objective of each explained. Material, design and construction...

Modified Asphalt Binders - How Do They Compare?
This report summarizes some of the research that the US Army Engineer Waterways Experiment Station (WES) has conducted on asphalt modification of airport/airfield pavements. these laboratory...

Utilization of Phosphogypsum-Based Slag Aggregate in Portland Cement and Asphaltic Concrete Mixtures
This study centers around the potential utilization of phosphogypsum-based slag aggregate as a substitute for coarse aggregate in both portland cement and asphaltic concrete surfaces for...

Nighttime Cement Concrete Pavement Replacement Seattle-Tacoma International Airport
Several airfield improvement projects are currently underway at Seattle-Tacoma International Airport (Sea-Tac), many of which are being constructed using cement concrete pavement. Due...

Cost Considerations in Planning Pier Terminals
The deregulation of the air transport economy is gradually leading to the involvement of private developers in airport terminal financing. Even the airports run by government agencies...

Aquifer Storage and Recovery in the Floridan Aquifer System of South Florida
This paper describes the feasibility, construction, testing, and storage zone development of the Boynton Beach Aquifer Storage and Recovery (ASR) well, the first successful ASR project...

Effects of Lateral Heading Flow Steadiness on Lateral Spillage
Hourly inflow and spillage rates from three lateral canals in the Imperial Irrigation District in Southern California were measured for seven months and subsequently analyzed to identify...

Willingness and Ability to Pay for Rural Water
Estimates of willingness to pay for rural water systems were developed in South Dakota, Oklahoma, and Montana from responses to contingent valuation surveys. Ability to pay was also estimated...

Water 2050-Supply for the Portland, Oregon Metropolitan Region Using the Integrated Resource Planning Process
This paper presents information about the long range regional water supply planning work that is being conducted in the Portland, Oregon metropolitan region. An integrated resources planning...

Vadose-Zone Monitoring, Sanitary Treatment Plant Sludge-Drying Beds, Rocky Flats Plant, Golden, Colorado
The NPDES Federal Facilities Compliance Agreement (NPDES FFCA) of March 25, 1991 between the U. S. Department of Energy (DOE) and the U. S. Environmental Protection Agency (EPA), pursuant...

 

 

 

 

Return to search