Characterizing the Hydrogeologic Framework of the Death Valley Region, Southern Nevada and California
Three-dimensional (3-D) hydrogeologic modeling of the complex geology of the Death Valley region requires the application of a number of Geoscientific Information System (GSIS) techniques....
The Effect of Certain Assumptions on the Number and Type of Spent Fuel Casks Required 1998-2000
The Office of Civilian Radioactive Waste Management M&O contractor is determining the number of spent fuel transportation cask systems required to transport fuel from reactors...
Application of Discrete Event Simulation to MRS Design
The application of discrete event simulation to the Monitored, Retrievable Storage (MRS) material handling operations supported the MRS conceptual design effort and established a set of...
Reliability Modeling of an Engineered Barrier System
The Weibull distribution is widely used in reliability literature as a distribution of time to failure, as it allows for both increasing failure rate (IFR) and decreasing failure rate...
Optimizing Human Reliability: Mock-Up and Simulation Techniques in Waste Management
This presentation describes an ongoing effort to incorporate human factors principles into the design and process development for waste management programs at a nuclear weapons plant....
Recent Developments in Stochastic Modeling and Upscaling of Hydrologic Properties in Tuff
A set of detailed geostatistical simulations of porosity has been produced for a layered stratigraphic sequence of welded and non-welded volcanic tuffs at Yucca Mountain, Nevada. The simulations...
Modeling Adsorption of Mixtures of Radionuclides by Zeolitized Tuff
Multi-solute sorption isotherms were measured using 'nonscents', a zeolitized volcanic tuff material from Southeast Arizona. Isotherms for the three constituent binaries, Sr-Co, Cs-Sr...
Subsurface Transport of Radioactive Material Using Adaptive Finite Elements
A finite element method which utilizes mesh adaptation is used to calculate transient groundwater flow and pollutant transport. Mass lumping and reduced integration are employed to enhance...
Modeling of Saturated Zone at Yucca Mountain, Nevada
This paper presents preliminary results of groundwater modeling of the saturated zone in the vicinity of Yucca Mountain. The analysis used both a regional (approximately 250 ? 250 km)...
Integrated Test Evaluation Decision Framework for the Yucca Mountain Project
An Integrated Test Evaluation decision framework and computer model were developed to help prioritize site-characterization tests at Yucca Mountain. An initial application of the framework...
Factors Affecting Performance of Vitrified Wasteforms
The acceptability and usefulness of mathematical models for predicting the performance of vitrified wasteforms can be enhanced by their validation using laboratory data generated under...
Thermal-Hydraulic Analyses of Molten Glass in a Joule-Heated Melter
Physical modelling using glycerine and three-dimensional mathematical modelling were executed to study temperature and flow profiles of molten glass in the melter for the vitrification...
A Numerical Analysis of Spent Nuclear Fuel Thermal Characteristics
A numerical analysis is presented comparing the thermal behavior of a spent boiling water reactor fuel pin and an electric heating element intended to simulate the fuel pin in an experimental...
Numerically Predicting Horizontally Oriented Spent Fuel Rod Surface Temperatures
A comparison between numerical calculations with use of commercial thermal analysis software packages and experimental data simulating a horizontally oriented spent fuel rod array was...
A Homogeneous Equilibrium Model for Analysis of Spent Fuel Shipping Containers
Transportation of nuclear spent fuel is inevitable over the coming years. However, in order to ensure the safety of such transport, computational models must be established, which are...
Heat Transfer in Vertical Concentric Cylinders in a High Level Nuclear Waste Repository
Modeling free convection heat transfer in an cylindrical annular enclosure is still an active area of research and an important problem to be addressed in the high level nuclear waste...
Structure of Crater Flat and Yucca Mountain, Southeastern Nevada, as Inferred from Gravity Data
Existing gravity data in the vicinity of Yucca Mountain and Crater Flat have been examined to determine if these data support only the caldera model or if they support other geologic models...
Geometric Analyses of Alternative Models of Faulting at Yucca Mountain, Nevada
Realistic cross section tectonic models must be retrodeformable to geologically reasonable pre-deformation states. Furthermore, it must be shown that geologic structures depicted on cross...
Detachment Faults?Regulatory Implications for the Yucca Mountain Site
Site characterization investigations at the Yucca Mountain site, Nye County, Nevada consist of a combination of scientific data collection and analyses, and compliance with regulatory...
Aperture Characteristics, Saturated Fluid-Flow, and Tracer-Transport Calculations for a Natural Fracture
We used surface-profile data taken with a noncontact laser profilometer to determine the aperture distribution within a natural fracture and found the surfaces and apertures to be isotropic....
Return to search