Generalized Optimal Active Control with Embedded and Half-space Soil-Structure Interaction
The paper presents an optimal active control algorithm with soil-structure interaction for seismic response. By using an intelligent device in the feedback gain matrix, the algorithm can...
FEM in a Design Code Environment
The results obtained from the use of finite element based analysis tools have created a new problem for designer: Which numbers do we use to check against Code limits? Most of the commonly...
Effect of Roughness and Thickness of Biofilms on External Mass Transfer Resistance
The effect of roughness and thickness of biofilms on the dissolved oxygen (DO) concentration boundary layer thickness (DO CBLT) and the external mass transfer process in a biofilm system...
Roughness Coefficient in Mountain Rivers
River discharge estimations require an evaluation of the river flow resistance that generally is related with Manning's roughness coefficient. The literature suggests different ways of...
An Alternative Equation for the Mean Velocity in Gravel-Bed Rivers and Mountain Torrents
Including new field data in the slope range of torrents up to 63%, an empirical equation is developed to express the mean flow velocity in terms of the flow rate, the slope and a characteristic...
At-A-Site Mountain River Flow Resistance Variation
At-a-site variation in flow resistance is examined in the light of observations of an S-shaped velocity profile at relative submergences (d/D84)...
Evaluating Flow Resistance Using Height of Roughness Protrusions
On the basis of field measurements on the Sumava mountain rivers heights of roughness protrusions have been used for calculation of flow resistance. The result resistance equations, compared...
Flow Resistance of High-Gradient Gravel Channels
The flow resistance in terms of the friction factor for bank-full or high in-bank flows for 120 high-gradient gravel-bed rivers are examined. The friction factor f was divided into grain...
Supercritical Flows Versus Subcritical Flows in Natural Channels
Many analysts model large discharges and/or high-gradient reaches as supercritical flow. While this assumption may be valid for man-made channels of smooth, non erosive materials, and...
Step-Pool Streams: An Adjustment to Maximum Flow Resistance
An experiment was conducted to study the maximum flow resistance of step pool streams and the morphology of the steps formed from clastic materials. The step pool formation was qualitatively...
Sediment Transport in Sewers and Design Implications
Extended studies on sediment transport in sewers were conducted at the University of Newcastle upon Tyne and using this new as well as previously available data an attempt has been made...
A Physically-Based Model of Channel Widening
The application of many existing models of river channel morphology is limited by their inability to account for bank erosion and changing channel width through time. This paper outlines...
Sheet Flow Resistance of Asphaltic Pavements
A statistical study has been conducted by the authors using 400 points of experimental data taken in the 1970's at Texas A&M for sheet flow runoff during artificial rainfall on...
Spatial, Lattice and Tension Structures
This proceedings,
Analysis and Computation
This proceedings,
Let's Go to the Videotape
Illustrating a design concept to educate and soften the resistance of community groups, environmentalists, government regulators and funding agencies is not a new idea. But the state of...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Seismic Design Criteria for Transporation Structures
Presented is a discussion focusing on two critical issues which must be resolved when setting seismic design criteria for important transportation structures such as those supporting elevated...
Design Criteria for Seismic Connections in Precast Concrete
The seismic behavior of precast concrete is contrasted with that of cast-in-place and the conditions that precast must satisfy are reviewed. Design criteria and possible strategies for...
Ductile Connections for Precast Concrete Frame Systems
This paper describes a research program to investigate the behavior of ductile connections between precast beam-column elements. The objectives of the program are to provide rational design...
Return to search