Rock Steady
Heavily damaged during the Loma Prieta earthquake, Oakland City Hall had to be repaired and retrofitted. Now Oakland boasts the tallest seismically isolated building in the world. The...
Foundation Upgrading and Repair for Infrastructure Improvement
This proceedings,
Static and Dynamic Properties of Gravelly Soils
The behavior of gravelly soils has been the focus of much research in recent years. Large-scale penetration and triaxial tests, shear-wave velocity measurements, insitu freezing and sampling,...
On the Dynamics and Control of Flexible Orbiting Systems: An Approach with Application
A relatively general formulation for studying the dynamics and control of an arbitrary spacecraft, with interconnected flexible, deployable and articulating structural members, is reviewed...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
Behavior of Foundations Subjected to Large Ground Movements
The behavior of twelve linear test foundations above an advancing longwall coal mine panel was observed. Three phases of deformation were observed in the centerline foundations: tension,...
Composite Walls as Shear Elements in Tall Structures
This paper describes a system of composite walling that can be used as a lateral load resisting system in tall structures. The composite walling comprises two skins of profiled steel sheeting...
Strut-Tie Model Design of Disturbed Regions in Concrete Structures
The design of disturbed (highly non-linear behavior) regions in concrete structures is illustrated using strut-tie approach. The use of this approach assisted with interactive computer...
Behavior of RC Beams under Sustained Load
Experimental results of eight reinforced concrete beams under 3-month's sustained load, with the ratio of shear span to depth equal to 2.5, are reported. It is shown by tests that the...
Case Study - Performance of Diaphragm Walls During Construction; Predictions vs. Field Measurements
Rigid diaphragm walls (slurry walls) are being used more than any other earth supporting system for underground construction projects in confined downtown sites throughout the United States...
Design of Lateral Steel in Columns
Lateral steel in columns is generally required for shear resistance, confinement of concrete and prevention of buckling of longitudinal bars. This paper is limited to the design of lateral...
The Use of Coda Waves for Characterizing the Site Effect on Strong Ground Motion
The well established separability of source, path and site effects on coda waves of local seismic events offers the most effective means for determining the site amplification factor empirically....
Metal Truss Plates: Less than Full-Depth Penetration and Shear Buckling
This paper presents the results of two experimental studies on metal truss plates which are used to join members of wood trusses. The first study investigated the effect that less than...
Seismic Strengthening of URM Buildings with Steel Bracing
Unreinforced masonry (URM) buildings with large open fronts are extremely vulnerable to seismic inputs posing serious life safety hazard. Steel bracing systems have been used to upgrade...
Return to search