Nonlinear Macroscopic Finite Element Model for Masonry Walls
A macroscopic finite element model which includes both transverse shear effects and nonlinearity due to cracking has been developed for masonry. These features are accommodated using a...
Behavior of Cavity Masonry Walls Under Out-of-Plane Lateral Loading: An Analytical Approach
In this paper, a finite element model is used to analyze cavity walls in an attempt to understand their complex behavior and to evaluate the adequacy of the assumptions embodied in the...
Shear Design of Masonry Walls
The paper presents a summary of a research project carried out at the Swiss Federal Institute of Technology Zurich to develop a design method based on the ultimate strength of masonry...
Shear Stresses in Composite Masonry Walls
The behavior of composite masonry walls subjected to inplane loads is a subject that has received little attention during the last few years. The small amount of experimental and analytical...
Masonry Rehabilitation: Practice and Research
The rehabilitation of masonry buildings is a major construction activity in the United States. The available techniques and evaluation methodologies are limited to visual investigation...
New Analysis Techniques for Structural Masonry
These seven papers on analysis of structural masonry that constitute this Proceedings were presented at a technical session at the ASCE Structural Engineering Congress held at Hyatt Regency...
Rehabilitation, Renovation, and Reconstruction of Buildings
This document constitutes the proceedings for a National Science Foundation funded workshop to discuss research needs pertaining to the buildings side of infrastructure. It includes discussion...
Seismic Evaluation of Reinforced Masonry Walls
Masonry walls in operating nuclear plants are in many cases found to be overstressed in terms of allowable stresses when evaluated using current seismic design criteria. However, experimental...
The Use of Joint Reinforcement in Qualifying Masonry Walls in Nuclear Power Plants
Wire joint reinforcement has been traditionally used in block masonry walls for crack control and to provide continuity for multiple wythe walls. In a number of nuclear power plants, vertically...
Dallas College Features Load-Bearing Brick Cavity Walls
A unique concept in masonry design and construction was developed for the Brookhaven College campus in Dallas, Texas. Centering on the use of prefabricated reinforced brick panels and...
San Antonio Freeway: Social-Impact Landmark
San Antonio's McAllister Freeway, or rather its proposed construction, aroused so much furor as to generate national publicity in the early 1970s. Objections arose because...
1842: Old Croton Aqueduct Brings Water, Rescues Manhattan From Fire, Disease
From 1774 to 1835 Manhattan experienced tremendous growth but needed better water supply to protect public health and to fight fires. Several proposals for providing water were forwarded...
Birth of the Skyscraper
Before invention of the elevator, six stories was the practical limit to the height of a commercial building. Following the Chicago fire of 1871, building designers there were quick to...
Planning and Design of Tall Buildings
Scope Index
This report, Scope Index, was originally part of Joint Committee Report 1 as Schedule 2.1. It is an alphabetical listing of the scope of the various chapters of the Monograph on Tall Buildings....
Planning and Design of Tall Buildings
Structural Design of Tall Concrete and Masonry Buildings
The objective of this monograph,
Return to search