Connection of Beam Flange to Concrete-Filled Tubular Column
Research has been carried out on a frame composed of a concrete-filled steel tubular column and H-shaped steel beam with the aim of developing a reasonable connection method. The proposed...
Full-scale Tests on Composite Connections
Tests have been carried out on eight full-scale composite connections in which the columns were manufactured of concrete-filled steel circular hollow sections (CHS). The connections were...
Connections of Concrete Filled Steel Beams
The concrete between the steel flanges of composite beams leads to problems in the connection area. To solve these problems four new types of beam-girder and beam-column connections are...
Thin Walled Circular Concrete Filled Steel Tubular Columns
The thin walled steel tube filled with high strength concrete delivers the economies of a concrete column with the speed of construction and the constructability of a steel column resulting...
Proposal on Story Drift Limit Based on Axial Behavior of Column under Seismic Loads
The main function of columns primarily is to support axial loads both under and after repeated lateral loading from earthquakes. A definition of the story drift limit in any structural...
Behavior of Concrete-Filled Steel Tubular Three-Dimensional Subassemblages
Three-dimensional subassemblages consisting of a concrete-filled steel tubular column and four H-shaped beams were tested under a constant axial load on the column, constant beam loads...
Composite Walling
This paper describes a study into a system of walling that comprises two skins of profiled steel sheeting infilled with concrete. During construction the steel sheeting acts as permanent...
The Definition of a Short Composite Column
A `short' column in composite construction is defined as one which can be designed for its cross-section strength alone without the need to consider stability effects. An extensive study...
Strength Deterioration Behavior of Concrete-Filled Steel Tubular Beam-Columns
Cantilever beam-columns of steel square hollow section with or without filled-concrete were tested under constant axial load and alternately repeated horizontal load to investigate the...
Force Transfer in Composite Columns
The force transfer from steel to concrete without mechanical transfer devices in composite columns at points of load introduction is studied. A mechanism of force transfer and the factors...
New Steel Beam to Composite Column Connection Detail
Composite columns consisting of hollow steel tubes filled with high strength concrete with compressive strength exceeding 10000 psi (69 MPa) are being used in high-rise buildings. Connecting...
Investigation of Parametrically-Induced Excitation in Concrete Columns
A mathematical model is developed which accounts for the non-linear material characteristic of concrete members. The axial and transverse motions of concrete columns, are found to be second-order...
Microbiologically Induced Corrosion
Researchers investigating a building whose columns bled a colorless liquid found that the building was under attack by microorganisms. A community of bacteria had contaminated the fireproofing...
Reliability Model for Bridge Columns under Seismic Loads
This paper develops a model for the analysis of the reliability of bridge columns under earthquake loads. Probability of failure is defined as the probability that the displacement ductility...
The OCEA Awards of Merit
Submerged rock weirs help tame the Mississippi River, high head pump storage provides power to a community safely and inexpensively, and the world's largest cantilevered hangar...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Developments in the Use of Cubic B-Splines in the Compound Strip Method
A general cubic B-spline compound strip method (BCSM) has been developed to analyze thin plates, stiffened plates, folded plates, and box-girders. In the BCSM a problem is first partially...
Large Displacement Analysis for Structural Stability Problems
In this paper, two widely different methods of large displacement analyses are considered. The first is a discrete element analysis which is particularly effective for line structures...
Return to search