Water Surface Profile Computations?How Many Sections do I Need?
One-dimensional streamflow models, including standard-step models, require a sufficient number of cross sections to satisfy two needs. First, a sufficient number of cross sections must...
Simulation of River Bed Evolution Below Tsengwen Reservoir in Taiwan
An uncoupled, one-dimensional river model, capable of simulating bed evolution, hydraulic sorting and armoring under unsteady flow conditions is presented in this paper. This unsteady...
On the Applicable Ranges of Kinematic and Diffusion Models in Open Channels
The kinematic and diffusion models using simplified momentum equations of the full dynamic equation have been frequently used for numerical flow simulations, because they have several...
Predicting Water Quality at Municipal Water Intakes?Part I: Application to the Contra Costa Canal Intake
The factors affecting water quality at a municipal surface water intake in the Sacramento-San Joaquin Delta are discussed. A model is developed that successfully predicts the seawater...
Predicting Water Quality at Municipal Water Intakes Part 2: Application to the Southern Sacramento-San Joaquin Delta
Work in progress on developing methodologies for predicting water quality at Municipal intakes in the Sacramento-San Joaquin Delta is discussed. Principal sources of salinity are identified...
Simulating THM Precursors Transport with DWRDSM
A study was conducted by the California Department of Water Resources (DWR) to demonstrate the ability of its Delta Simulation Model (DWRDSM) to simulate fate and movement of inorganic...
Particle Tracking Model for the Sacramento-San Joaquin Delta
A mathematical model has been developed to simulate the movement and fate of individual particles in a water column in an estuarine environment. The developed model not only keeps track...
Density Currents in Pollutant Transport and Mixing
A buoyant spreading model for the current-advected plume is formulated including several distinct mechanisms: convective spreading, interfacial friction spreading, entrainment at the density...
Criticality of Density Intrusions
Previous analyses of density intrusions indicates that a steady interface cannot be maintained if the front propagates at a speed greater than that of long interfacial waves. Supercritical...
Plunge-Pool Aeration Due to Inclined Jets
The present study quantifies how jet height and nozzle inclination angle and diameter affect the rate of air entrained by inclined circular jets. An air-collection hood and a vacuum pump...
Design of Pre-excavated Scour Hole Below Flip Bucket Spillways
A number of tests were performed on a model-scale flip bucket spillway with a gravel-bed plunge pool in order to develop equations to describe the geometry of the scour hole created by...
Design of Riprap Stilling Basin for Overhanging Pipe
The rock rip-rap basin is the most common and economical method of handling the problem of scour at a pipe outlet. The advantage of the method is speed of construction, absence of the...
Bed Sediments Size Changes, Atchafalaya River
During low flows of 1989 and 1991, we collected bed sediment samples from the thalwegs of the Mississippi River from Cairo, Illinois, to Head of Passes and along the Atchafalaya River...
A Study of Lateral Bed Slopes Developed at Bend
A study was conducted to compare seven actual cross section profiles of Philip Bayou Realignment with the lateral bed slopes estimated from the model derived by Ikeda titled `Sediment...
Bank Stability Analyses Versus Field Observations
The concept and process of stream bank stabilization design through the development and use of limiting stability curves for the comparison of existing bank height/angle combinations to...
Effect of Grain Size on Sediment Transport Calculations
The U.S. Army Corps of Engineers is currently developing a `Hydraulic Design Package for Flood Control Channels' (SAM). SAM is capable of computing sediment rating curves and stable channel...
Nonuniform Transient Sediment Transport Modeling
A numerical model based on Lai's (1991) multimode scheme for fully coupled simulation of water and sediment movement in mobile-bed alluvial channels with nonuniform bed materials has been...
Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...
The Separated Flow Around a Circular Bridge Pier
The unsteady separated flows around a flat plate/cylinder junction and a scour hole/cylinder junction were investigated experimentally. The flow in the plane of symmetry was presented....
Top Width of Pier Scour Holes in Free and Pressure Flow
The maximum top width of the local scour holes at piers is shown to be a simple function of the scour depth and the angle of repose of the bed material in water. Knowledge of the top width...
Return to search