ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Column and Beam-Column Design - A World View
This paper is concerned with the design of columns and beam-columns in steel building frames. Design provisions found in some selected codes viz. AS DR87164 87(Australia), BS5950 Part...

Some Aspects of Compression Member Design in Australia
The paper summarizes and elucidates the provisions of the Australian Standard AS4100-1990, Steel Structures, for the design of compression members. Emphasis is placed on those aspects...

Glass-covered Lightweight Spatial Structures
The double curved reticulated spatial structure with triangular mesh is the most favorable basis for a translucent roof. But this structure, especially is directly glazed without intermediate...

A Design for a Football Stadium Roof Enabling Growth of a Natural Grass Playing Surface: Sydney Football Stadium - Australia
This paper discusses the development of a design for a stadium roof which will provide conditions allowing the growth of a wearable natural grass surface suitable for sports including...

Phoenix Central Library: Reading Room Roof
This paper discusses the design and analysis of the cable truss roof over the fifth floor reading room of the new Phoenix Central Library. Forty pairs of diagonally oriented cable trusses...

Space Frame Solution for the Design of Large Pyramid Structures
This paper presents the engineering design methodology, structural analysis, system detailing, and installation procedures for a large span space frame structure currently under construction...

Roof Space Frame Design of the C.K.S. Airport Passenger Terminal II
This article attempts to provide a description of the characteristics of the Second Terminal Airport. To comply with the functional requirement of the magnificent facade and spacious design...

LRFD vs. ASD for Wood Structures
There is a growing preference within the structural engineering community for the adoption of reliability-based load and resistance factor design (LRFD) procedures in lieu of traditional...

What Controls the Ultimate Load of a Glulam Dome?
A glulam dome is analyzed with the finite element method to determine the governing failure mode and ultimate snow loads. The dome consists of a triangulated network of curved glulam beams,...

Timber Structures
This paper deals with three different curvilinear timber structures of moderate spans - 120 feet to 200 fee +/-. In each of the three cases cited, the roof deck and boundary members are...

An Application of Inverse Problem Techniques to Spatial Structures
The present paper attempts to give a definition of inverse problems for spatial structures, and to develop a design method to find the optimum configurations and shapes for such structures...

Structural Failure and Quality Assurance of Space Frames
Space frame has been developed rapidly in China and used to wide extent to cover various types of buildings. The large scale of application will unavoidably cause quality problems. Damages...

Prisms and Antiprisms
Prisms form a group of mathematical figures, that have found widespread application in many disciplines, but especially in architecture and in building structures. They have two identical...

Experimental Study on a Buckling Behavior of a Wooden Single-Layer Space Frame of Reticular Shell on a Hexagonal Plan: Influence due to the Bolted Joint Looseness with Axial and Bending Resistance
The authors have investigated about the structural behavior of a wooden single-layer space frame structure with the bolted joints. We have carried out a buckling tests of a wooden single-layer...

On some Problems of the Multicriteria Optimization of the Spatial Grid Structures
One can not think contemporary structure designed without consciously complying with optimization methods. Creative activity of engineers have to be optimal or semi-optimal. It is necessary...

Field Measurements of Tensile Forces on a Spherical Dome Sector Caused by Internal Load of a Granular Product in Storage
Using a number of existing equations developed application to silos, bins, and hoppers, the horizontal load resulting from the stored product can be calculated. In this paper, the physical...

Non-Linear Solution Methods for Shell and Spatial Structures
Non-linear solution methods are investigated for the analysis of shell and spatial structures based on limited memory quasi-Newton updates. Under the proposed implementation the preconditioned...

AWS versus AIJ Tubular K-Connection Design Rules
Among various existing design rules for circular tubular connections, the AWS rules are compared with the AIJ rules because of differences between the two. Subjects of discussion include...

The Behaviour and Design of Stressed-Arch (Strarch) Frames
The paper presents an overview of the stressed-arch structural system and the associated research program undertaken at the University of Sydney between 1988 and 1992. The objectives of...

Design of Half-Through or Pony Truss Bridges Using Square or Rectangular Hollow Structural Sections
The initial part of this paper will outline some of the research, testing, and investigation which has been done on half-through truss bridges. This research is primarily concerned with...

 

 

 

 

Return to search