Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...

Performance of Low Stiffness Plastic Pipe in Stiff Soils
Large diameter pipe made from ductile plastics, such as polyvinyl chloride (PVC), polypropylene (PP) and high density polyethylene (HDPE) can be effectively utilized in subsurface installations...

Design Criteria for Buried Flexible Pipe
A modified CANDE program was used to analyze a full factorial set of design parameters for buried, large diameter high density polyethylene profile-wall pipe. A new pipe subroutine was...

Importance of Pipe Soil Stiffness Ratio in Plastic Pipe Design
In this paper, the finite element method of analysis is used to study the effect of pipe-soil stiffness ratio on axial forces, bending moments, and deflection of pipes of varying stiffness....

Centrifugal Modeling of Pile Foundations
Modeling of pile foundations in a centrifuge, where the self weight induced stresses in the soil are simulated by elevated gravity loading, is described. Hollow pipe piles in a stiff clay...

Shaft Capacity of Driven Pipe Piles in Clay
A compilation of axial load test records for driven pipe piles in clay published by the American Petroleum Institute is analysed to yield new criteria for skin friction and pile scale...

New Tools Help Find Flaws
Certain electromagnetic tools for nondestructive evaluation of existing infrastructure, though not widely used, can cut cost and time of identifying flaws in existing infrastructure. Five...

Selecting an Economical Water Main Rehab
Many miles of aging water mains exist with carrying capacities that are less than half of what they were when new. Engineers must, therefore, stretch every dollar to eliminate deposits...

Abrasion Resistance of Polyethylene Dredge Pipe
In recent years there has been a slow but steady increase in the number of dredges using high density polyethylene (HDPE) pipe in discharge lines. HDPE's increased popularity...

Selecting a Dredge Pump
While it is not necessary for the dredge operator to know how to design a dredge pump, the ability to select one that meets his project requirements is essential to insure the success...

Analysis of Partially Filled Circular Storm Sewers
The classic design approach uses Manning's formula. Comparisons between analytical results obtained in this manner and the many available experimental results indicate substantial...

Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...

Milwaukee Sewerage District Interplant Pipeline
The pipeline is intended to transfer solids between the Jones Island and South Shore treatment works a distance of approximately 12 miles (19. 3 km). The 4 conduit pipeline comprising...

Hydrotest Rupture of Penstuck Liner at Bath County
Bath County is the construction site of Virginia Electric and Power Company's pumped storage project. Rupture of a penstock liner during hydrotest at high pressure threatened...

Pipe Spillway Plunge Pool Design Equations
An equation is given to determine if scour holes will beach and widen excessively. For nonbeaching scour holes, dimensionless equations are given for the progression of scour with time...

Factory-Built Pump Stations for Water Service
Booster pumps for fire protection in tall buildings and small sewage pump stations have been available for many years as factory-built packages. These packages include pumps, motors, controls,...

Pipeline Materials and Design
The proper use of pipeline materials and design is obviously paramount in the private and public works sectors. The introduction and proper use of new piping materials and design procedures...

Design and Operation of Pipeline Control Systems
More and more of the time of the engineer involved in the design and construction of a pipeline project is devoted to problems relating to the control systems to operate and monitor the...

Guidelines for the Seismic Design of Oil and Gas Pipeline Systems
Current knowledge on the practice of earthquake engineering for oil and gas pipeline systems is presented. Such systems typically consist of buried oil, gas, or product pipelines and aboveground...

What is UNIX?
UNIX is an operating system that is able to run a variety of machines. While most other operating systems are designed to go with particular software, UNIX can be easily adapted to run...

 

 

 

 

Return to search