Properties of Composites Using Recycled Plastics
Recycled poly(ethylene terephthalate), PET, mainly recovered from used plastic beverage bottles, can be used to produce unsaturated polyester resins. Polymer concrete (PC) and polymer...
Concreting at Subfreezing Temperatures
Temperature affects the rate at which portland cement concrete develops strength. Below about 20?C, strength gain is retarded, whereas at higher temperatures it is accelerated. Strength...
Performance of Recycled Asphalt Concrete Materials in an Arid Climate
Recycling of asphalt concrete pavement is a common practice for highway agencies. In 1981, the Arizona Department of Transportation (ADOT) constructed eight test sections in on experimental...
Reliability-Based Design for Feeeze-Thaw Concrete
Observation of pavements in Iowa shows results from the test for freezing and thawing of concrete, ASTM C-666, is not always consistent with field performance. Similar concrete made with...
Concrete Surface Treatments?A Selection Guide
Concrete deterioration can take many forms. The most common forms of concrete surface deterioration includes delaminations, spalling and scaling. This deterioration is usually caused by...
Rehabilitation of Chloride Damaged Concrete
There are several methods of rehabilitating structural concrete that must deal with the presence of chlorides. It is critical that the rehabilitation designer recognize the abilities of...
A Theoretical Approach to Characterize Reinforced Concrete Using Stress Waves
Although advances in nondestructive evaluation of structural concrete have been made, the ultrasonic determination of the placement of steel reinforcement in concrete remains difficult....
Investigation of Concrete at a Middle East Plant
In recent years, reinforced concrete construction in the Middle East has been beset by durability problems. The causes include availability of a limited number of skilled workers, marginal...
Innovations for NDT of Concrete Structures
The proposed paper presents three recent innovations for sonic and ultrasonic Non-Destructive Testing (NDT) of concrete structures which greatly increase the utility and speed of many...
Bond Strength of Straight GFRP Rebars
An overview of a study on bond of straight Glass-fiber-reinforced-plastic (GFRP) rebars to concrete is presented. The 54 specimens to be tested include several variables, such as the mode...
Glass-Fiber Reinforcing Rod: Characterization and Application to Concrete Structures and Grouted Anchors
This paper presents the physical and mechanical characteristics of a new glass-fiber reinforcing rod which was developed to be used as a rebar for concrete structures or a tendon for grouted...
Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...
Splice/Development Length Requirements for FRP Grids Used in the Structural Reinforcement of Concrete
The research presented in this paper program was directed towards determining development length and splice requirements for FRP grids used in the reinforcement of concrete structures....
Feasibility of FRP Molded Grating-Concrete Composites for One-Way Slab Systems
This paper describes the behavior of one-way concrete slabs reinforced with Fiberglass Reinforced Plastic (FRP) molded grating. FRP molded grating is commercially available and is mainly...
Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
Fiber/Epoxy Composites Strengthen Bridge Columns
The California Department of Transportation is using high strength fiber/epoxy composites to strengthen existing reinforced concrete bridge columns. These advanced composite materials...
Behavior of Concrete-Graphite/Epoxy Sections in Composite Bridge Girders
The focus of this work is on the behavior of composite bridge girders constructed from carbon-fiber-reinforced-plastic sections and concrete slabs. The study examines four-point bending...
Sprayed-Zinc Galvanic Anodes for the Cathodic Protection of Reinforcing Steel in Concrete
Corrosion of reinforcing steel bars (rebars), due to penetration of chloride ions from seawater affects the substructure of many bridges in marine service. In a new, low cost control method,...
Return to search