Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...

Reliability of Structures for the Moon
The subject of risk and reliability for lunar structures is introduced and critical issues deliberated. A tensile structure is considered as an example in order to become more specific...

Design Techniques for Rectangular Lunar Modules
This paper discusses relevant issues concerning the design and performance of cubical lunar modules. Previously, these modules have shown to be a possible solution for living and working...

A Membrane Structure for a Lunar Assembly Building
This paper describes potential design options and construction approaches for the development of an inflatable membrane structure of non-circular cross section. This structure could be...

Thermal Response in Antenna Under Laser Irradiation
This investigation focuses on the thermal response of two objects under medium-intensity continuous-wave (CW) laser irradiation: (1) a homogeneous slab and (2) a complex electronic component,...

A New Airlock Approach for Human Exploration
Conceptual design work on the First Lunar Outpost (FLO) mission led to the development of an airlock concept called the `doorlock' which appears quite promising for all aspects of manned...

Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...

Development of a Partial Gravity Lunar Airlock
The Planetary Projects Office (PPO) at the Johnson Space Center is developing design reference missions for human exploration of the Moon and Mars. Missions for both planets require a...

Analysis of Inflating Habitable Space Structures with neomass (near-Earth-object mass)
The discovery of near Earth objects (NEOs), during August 1992, and that one of them is a dormant comet, dramatically changed the potential availability of near-Earth resources. NEOs provide...

Axisymmetric Vibrations of Thick-Walled Cylindrical Tubes in the Presence of Thermal Residual Stresses
The paper presents an approach to the analysis of axisymmetric vibrations of thick-walled specially orthotropic multilayered cylindrical tubes. The first part of the paper is concerned...

Inelastic Response of Metal Matrix Composite Tubes
An analytical method which exactly satisfies the equations of the boundary value problem for the inelastic response of laminated metal matrix composite tubes on a point-wise basis is presented....

Mechanics of Curved Fiber Bundles in Composites
Fiber undulations are inherent to manufacturing processes like braiding and filament-winding, and sometimes occur as defects in other composite structures. This paper summarizes the status...

Behavior of Bolted Joints in 3-D Braided Composites
As composites are used more as replacements for metals in space structures, the question arises as to the most efficient way to join the components. Mechanical fasteners are a common joining...

Damage Tolerance of Thin Composite Reinforced Membrane Structures
Structural performance of fiber reinforced flexible composite membranes, designed as pressurized shelters for space exploration, is investigated via computational simulation. An integrated...

Hygrothermal Effects in Composite Sandwich Panels
The macromechanical analysis of a composite panel with laminate facings and a honeycomb core is carried out by taking into account mechanical and hygrothermal loads. In this analysis the...

Convergence Rates of the Method of Successive Elastic Solutions in Thermoplastic Problems of a Layered Concentric Cylinder
This paper examines convergence rates of the method of successive elastic solutions, proposed by Mendelson, in determining the thermoplastic response of an arbitrarily layered concentric...

Optical Scatter From a Space Craft Mirror Due to Microscopic Impacts
This article addresses the issue of how micrometeoroid and man made debris in the space environment can adversely change the optical resolution of a mirror. The study used an algorithm...

Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...

Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...

Erectable Truss Hardware for Large Space Structures
The KATLOK connector is a truss structure connector that was designed to be compatible with manual assembly by an astronaut in an extra-vehicular activity (EVA) suit, telerobotic assembly...

 

 

 

 

Return to search