When to Connect Your New Supply
The use of risk analysis is important to a water utility. The economic losses to the local economy as a result of water shortages can be astronomical. On the other hand, the high rates...
Applying Benefits-to-Costs Analysis for Stormwater Improvement Projects
Benefit-to-cost analyses provide a measure of evaluation for the justification, selection, and prioritization of stormwater improvement projects. Facing increased competition for tax dollars...
Levee Failure at Elba, Alabama
In March 1990, flooding resulted in levee failure at Elba, Alabama. The levee project was constructed in 1938 by the Works Progress Administration to provide protection to the city from...
Limit and Post-Limit Behavior of Space Trusses
A numerical technique for the nonlinear analysis of space trusses taking into consideration such factors as load-eccentricity, initial crookedness of the member and nonlinear stress-strain...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Wave Loading Linearization for Offshore Structures
The linearization of Morison-type wave loading is to replace u|u| by cu, where u is a zero mean, stationary Gaussian random process and c is a constant. In the present study an optimal...
Myocardial Wall Stress: A Clinician's View
Definition of left ventricular (LV) wall stress is a parameter which has a valid application in clinical medicine. This paper discusses this application as it pertains to various cardiac...
Diastolic Function Using 3-D Echo Reconstruction and Finite Element Analysis: Applications for Study in Animal Models and Patients
We have initiated animal experiments using three-dimensional reconstruction of echocardiographic recordings and finite element analysis to evaluate the effects of alterations in preload,...
Large Deformation Analysis of Cardiac Structures
The finite element technique can be used to simulate the response of the cardiac structures that have complex shape and geometry and nonlinear material properties. This paper enumerates...
Three-Dimensional Finite Element Analysis of Stress and Activation in the Heart
A finite element (FE) method has been developed for three-dimensional (3D) analysis of stress distributions and activation patterns in the left and right ventricles of the canine heart....
Structural Aspects of Femoral Head Osteonecrosis
Orthopaedic management of early stage osteonecrosis (ON) of the femoral head is aimed at delaying or preventing collapse of structurally weakened regions of repairing dead bone. The advent...
Simulation of Head/Neck Response to -Gx Impact Acceleration
The Articulated Total Body (ATB) model has been developed to predictively simulate the head and neck response by specifying a 2-segment/2-joint system driven at the anatomical thoracic...
In-Vitro Measurement of Static Contact Pressure Distribution in Synovial Joints
The objective of this presentation is, at first, to review the various approaches to the measurement of contact pressure distribution in synovial joints, and then to describe the development...
Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
Engineering Applications of the Analysis of a Spherical Shell
In a companion paper, a set of two integral equations have been established for a spherical shell under axisymmetric loads. This set of equations may be solved numerically by using Nystrom...
Curvature Effects on the Deflection and Vibration of Cross-Ply Shallow Shells
The use of high performance materials is becoming increasingly significant in structures subjected to severe loading conditions. Effects of curvature on the stiffness characteristics of...
Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...
Return to search